Determination of 79Se and 135Cs in Spent Nuclear Fuel for Inventory Estimation of High-Level Radioactive Wastes

• Published in: Journal of nuclear science and technology 2011-05, Vol.48 (5), p.851-854
• Main Authors: ASAI, Shiho, HANZAWA, Yukiko, OKUMURA, Keisuke, SHINOHARA, Nobuo, INAGAWA, Jun, HOTOKU, Shinobu, SUZUKI, Kensuke, KANEKO, Satoru
• Format: Article
• Language: English
• Subjects: Applied sciences; burn-up; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Fission nuclear power plants; Fuels; geological disposal; high-level radioactive waste; ICP-QMS; Installations for energy generation and conversion: thermal and electrical energy; inventory estimation; JENDL-3.3; Nuclear fuels; ORIGEN2; Preparation and processing of nuclear fuels; spent nuclear fuel
• ISSN: 0022-3131; 1881-1248
• DOI: 10.1080/18811248.2011.9711768

79 Se and 135 Cs are long-lived fission products and are found in high-level radioactive waste (HLW). The estimation of their inventories in HLW is essential for the safety assessment of geological disposal, owing to their mobility in the strata. In this study, the amounts of 79 Se and 135 Cs in a spent nuclear fuel solution were measured. About 5 g of irradiated UO 2 fuel discharged from a commercial Japanese pressurized water reactor (PWR) with a burn-up of 44.9 GWd/t was sampled and dissolved with 50mL of 4M nitric acid in a hot cell for 2 h. After Se and Cs were chemically separated, the amounts of 79 Se and 135 Cs in the spent nuclear fuel solution were measured by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). The amounts of 79 Se and 135Cs were 5:2 ± 1:5 and 447 ± 40 g/MTU, respectively. The results presented in this study, which are the first postirradiation experimental data in Japan, showed good agreement with those obtained by the ORIGEN2 code using the data library of JENDL-3.3.