Determination of thermal performance of a box type solar cooker

• Published in: Solar energy 2015-03, Vol.113, p.324-331
• Main Authors: Geddam, Sunil, Dinesh, G. Kumaravel, Sivasankar, Thirugnanasambandam
• Format: Article
• Language: English
• Subjects: Box type solar cooker; Design specifications; Finned cooker; Heating; Load variation; Ovens & stoves; Performance evaluation; Phase change material; Product design; Temperature effects; Thermal performance; Ultraviolet radiation
• ISSN: 0038-092X; 1471-1257
• DOI: 10.1016/j.solener.2015.01.014

•The performance study of conventional, finned & PCM added solar cooker were done.•Close agreements obtained between predicted & experimental heating characteristic curves.•F2 reveal that the followed methodology is capable of predicting thermal behavior.•Calculated F1 &F2 values indicate consecutive cooking can be done on sunny day.•The experimentation with finned vessel shows consistent reduction in cooling time. There has been a considerable recent interest in the design, development and testing of various types of solar cookers like box type, concentrator type and oven type around the globe. Out of these, box type solar cookers have so far been disseminated at the mass level which is the simplest in terms of operation and fabrication and the temperature of around 100°C is achieved. This range of temperature is suitable for cooking by boiling, which is prevalent in the most parts of India. However, in spite of having these desired features, such cooker may either fail to cook or take a longer time to cook full load of food. The design parameters of solar cooker are among the several other important parameters that influence its thermal performance. In order to analyze the thermal performance of a box-type solar cooker in a better qualitative manner, it is therefore necessary to have the knowledge of design parameters, optical efficiency and heat capacity of the cooker to provide a basis for the selection of proper materials for its construction. This study deals with a test procedure to determine these parameters using the experimentally obtained F2 data for different load of water and to apply the proposed procedure to predict the heating characteristic curves and to validate the proposed methodology by comparing the predicted values with those obtained experimentally.