Loading…
Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD)
In this research, SnO 2 films were prepared by atmospheric pressure chemical vapor deposition technique on a glass substrate. Then, the effects of oxygen and nitrogen flow rates and deposition time on the structural, optical and electrical properties of the thin films were studied. The films were ch...
Saved in:
Published in: | Journal of materials science. Materials in electronics 2016, Vol.27 (1), p.921-930 |
---|---|
Main Authors: | , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
cited_by | cdi_FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3 |
---|---|
cites | cdi_FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3 |
container_end_page | 930 |
container_issue | 1 |
container_start_page | 921 |
container_title | Journal of materials science. Materials in electronics |
container_volume | 27 |
creator | Fadavieslam, M. R. Azimi-Juybari, H. Marashi, M. |
description | In this research, SnO
2
films were prepared by atmospheric pressure chemical vapor deposition technique on a glass substrate. Then, the effects of oxygen and nitrogen flow rates and deposition time on the structural, optical and electrical properties of the thin films were studied. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, atomic force microscopy, electrical resistance measurements using two-point probe technique, Hall Effect, photo-conductivity effect and optical absorption (UV–Vis). The films had uniform polycrystalline structure. The average optical band gap of the films was 3.8 eV. The results of Hall Effect showed that majority carriers were n-type and carrier concentration varies in the range of 5.84 × 10
18
–1.89 × 10
19
cm
−3
. Increasing oxygen flow rate led to increasing the specific resistance, photosensitivity and Seebeck coefficient (at 350 K), and also decreasing optical band gap, mean grain size and surface roughness plus higher XRD peaks. Increasing nitrogen flow rate led to decreasing optical band gap, specific resistance, and photosensitivity and Seebeck coefficient (at 350 K). Increasing the deposition time led to an increase–decrease trend in the optical band gap, a decrease–increase trend in specific resistance and an increase in photosensitivity and Seebeck coefficient (at 350 K). The average transmittance and optical band gap of films were 82 % and 3.8 eV, respectively. Hall Effect studies revealed that the films exhibit n-type conductivity. |
doi_str_mv | 10.1007/s10854-015-3835-0 |
format | article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_1755754671</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>3917361671</sourcerecordid><originalsourceid>FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3</originalsourceid><addsrcrecordid>eNp1kc1u1DAURi0EEkPhAdhZ6gakBq7_4mRZTaGtVDGVCoid5Tg3nVRJHGwH1Jfrs9UzA1I3XVj3Lr5zbOsj5D2DTwxAf44MKiULYKoQlVAFvCArprQoZMV_vSQrqJUupOL8NXkT4x0AlFJUK_JwhjNOLU4Oqe_ohp_Qb5x2g_9Lg01I7dTSFmcf-9T7iaZ-zLk8t0hjCotLS7DDCcUBXQq9s8Oe8HPa73PwM4bUY9zJb6YNz2Q_0a4fxvjfiy1t7qlNo4_zFrMkYxjjEpC6LY570R87-_D0IR9Or9c_zz6-Ja86O0R8928ekR9fv3xfXxRXm_PL9elV4QQwKJSqpHVOgeWuEq6RTcWZUxy0LvNasabuRImC1dYJ19VlPiAbpuuybWXrxBE5Pnjzj34vGJO580uY8pWGaaW0kqVmOcUOKRd8jAE7M4d-tOHeMDC7msyhJpNrMruaDGSGH5iYs9MthifmZ6FHJ_uXmA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>1755754671</pqid></control><display><type>article</type><title>Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD)</title><source>Springer Link</source><creator>Fadavieslam, M. R. ; Azimi-Juybari, H. ; Marashi, M.</creator><creatorcontrib>Fadavieslam, M. R. ; Azimi-Juybari, H. ; Marashi, M.</creatorcontrib><description>In this research, SnO
2
films were prepared by atmospheric pressure chemical vapor deposition technique on a glass substrate. Then, the effects of oxygen and nitrogen flow rates and deposition time on the structural, optical and electrical properties of the thin films were studied. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, atomic force microscopy, electrical resistance measurements using two-point probe technique, Hall Effect, photo-conductivity effect and optical absorption (UV–Vis). The films had uniform polycrystalline structure. The average optical band gap of the films was 3.8 eV. The results of Hall Effect showed that majority carriers were n-type and carrier concentration varies in the range of 5.84 × 10
18
–1.89 × 10
19
cm
−3
. Increasing oxygen flow rate led to increasing the specific resistance, photosensitivity and Seebeck coefficient (at 350 K), and also decreasing optical band gap, mean grain size and surface roughness plus higher XRD peaks. Increasing nitrogen flow rate led to decreasing optical band gap, specific resistance, and photosensitivity and Seebeck coefficient (at 350 K). Increasing the deposition time led to an increase–decrease trend in the optical band gap, a decrease–increase trend in specific resistance and an increase in photosensitivity and Seebeck coefficient (at 350 K). The average transmittance and optical band gap of films were 82 % and 3.8 eV, respectively. Hall Effect studies revealed that the films exhibit n-type conductivity.</description><identifier>ISSN: 0957-4522</identifier><identifier>EISSN: 1573-482X</identifier><identifier>DOI: 10.1007/s10854-015-3835-0</identifier><language>eng</language><publisher>New York: Springer US</publisher><subject>Characterization and Evaluation of Materials ; Chemistry and Materials Science ; Materials Science ; Optical and Electronic Materials</subject><ispartof>Journal of materials science. Materials in electronics, 2016, Vol.27 (1), p.921-930</ispartof><rights>Springer Science+Business Media New York 2015</rights><rights>Springer Science+Business Media New York 2016</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3</citedby><cites>FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Fadavieslam, M. R.</creatorcontrib><creatorcontrib>Azimi-Juybari, H.</creatorcontrib><creatorcontrib>Marashi, M.</creatorcontrib><title>Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD)</title><title>Journal of materials science. Materials in electronics</title><addtitle>J Mater Sci: Mater Electron</addtitle><description>In this research, SnO
2
films were prepared by atmospheric pressure chemical vapor deposition technique on a glass substrate. Then, the effects of oxygen and nitrogen flow rates and deposition time on the structural, optical and electrical properties of the thin films were studied. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, atomic force microscopy, electrical resistance measurements using two-point probe technique, Hall Effect, photo-conductivity effect and optical absorption (UV–Vis). The films had uniform polycrystalline structure. The average optical band gap of the films was 3.8 eV. The results of Hall Effect showed that majority carriers were n-type and carrier concentration varies in the range of 5.84 × 10
18
–1.89 × 10
19
cm
−3
. Increasing oxygen flow rate led to increasing the specific resistance, photosensitivity and Seebeck coefficient (at 350 K), and also decreasing optical band gap, mean grain size and surface roughness plus higher XRD peaks. Increasing nitrogen flow rate led to decreasing optical band gap, specific resistance, and photosensitivity and Seebeck coefficient (at 350 K). Increasing the deposition time led to an increase–decrease trend in the optical band gap, a decrease–increase trend in specific resistance and an increase in photosensitivity and Seebeck coefficient (at 350 K). The average transmittance and optical band gap of films were 82 % and 3.8 eV, respectively. Hall Effect studies revealed that the films exhibit n-type conductivity.</description><subject>Characterization and Evaluation of Materials</subject><subject>Chemistry and Materials Science</subject><subject>Materials Science</subject><subject>Optical and Electronic Materials</subject><issn>0957-4522</issn><issn>1573-482X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2016</creationdate><recordtype>article</recordtype><recordid>eNp1kc1u1DAURi0EEkPhAdhZ6gakBq7_4mRZTaGtVDGVCoid5Tg3nVRJHGwH1Jfrs9UzA1I3XVj3Lr5zbOsj5D2DTwxAf44MKiULYKoQlVAFvCArprQoZMV_vSQrqJUupOL8NXkT4x0AlFJUK_JwhjNOLU4Oqe_ohp_Qb5x2g_9Lg01I7dTSFmcf-9T7iaZ-zLk8t0hjCotLS7DDCcUBXQq9s8Oe8HPa73PwM4bUY9zJb6YNz2Q_0a4fxvjfiy1t7qlNo4_zFrMkYxjjEpC6LY570R87-_D0IR9Or9c_zz6-Ja86O0R8928ekR9fv3xfXxRXm_PL9elV4QQwKJSqpHVOgeWuEq6RTcWZUxy0LvNasabuRImC1dYJ19VlPiAbpuuybWXrxBE5Pnjzj34vGJO580uY8pWGaaW0kqVmOcUOKRd8jAE7M4d-tOHeMDC7msyhJpNrMruaDGSGH5iYs9MthifmZ6FHJ_uXmA</recordid><startdate>2016</startdate><enddate>2016</enddate><creator>Fadavieslam, M. R.</creator><creator>Azimi-Juybari, H.</creator><creator>Marashi, M.</creator><general>Springer US</general><general>Springer Nature B.V</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7SP</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>8FE</scope><scope>8FG</scope><scope>ABJCF</scope><scope>AFKRA</scope><scope>ARAPS</scope><scope>BENPR</scope><scope>BGLVJ</scope><scope>CCPQU</scope><scope>D1I</scope><scope>DWQXO</scope><scope>F28</scope><scope>FR3</scope><scope>HCIFZ</scope><scope>JG9</scope><scope>KB.</scope><scope>L7M</scope><scope>P5Z</scope><scope>P62</scope><scope>PDBOC</scope><scope>PQEST</scope><scope>PQQKQ</scope><scope>PQUKI</scope><scope>PRINS</scope><scope>S0W</scope></search><sort><creationdate>2016</creationdate><title>Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD)</title><author>Fadavieslam, M. R. ; Azimi-Juybari, H. ; Marashi, M.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2016</creationdate><topic>Characterization and Evaluation of Materials</topic><topic>Chemistry and Materials Science</topic><topic>Materials Science</topic><topic>Optical and Electronic Materials</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Fadavieslam, M. R.</creatorcontrib><creatorcontrib>Azimi-Juybari, H.</creatorcontrib><creatorcontrib>Marashi, M.</creatorcontrib><collection>CrossRef</collection><collection>Electronics & Communications Abstracts</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>ProQuest SciTech Collection</collection><collection>ProQuest Technology Collection</collection><collection>Materials Science & Engineering Collection</collection><collection>ProQuest Central</collection><collection>Advanced Technologies & Aerospace Collection</collection><collection>AUTh Library subscriptions: ProQuest Central</collection><collection>Technology Collection</collection><collection>ProQuest One Community College</collection><collection>ProQuest Materials Science Collection</collection><collection>ProQuest Central</collection><collection>ANTE: Abstracts in New Technology & Engineering</collection><collection>Engineering Research Database</collection><collection>SciTech Premium Collection</collection><collection>Materials Research Database</collection><collection>Materials Science Database</collection><collection>Advanced Technologies Database with Aerospace</collection><collection>ProQuest advanced technologies & aerospace journals</collection><collection>ProQuest Advanced Technologies & Aerospace Collection</collection><collection>Materials science collection</collection><collection>ProQuest One Academic Eastern Edition (DO NOT USE)</collection><collection>ProQuest One Academic</collection><collection>ProQuest One Academic UKI Edition</collection><collection>ProQuest Central China</collection><collection>DELNET Engineering & Technology Collection</collection><jtitle>Journal of materials science. Materials in electronics</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Fadavieslam, M. R.</au><au>Azimi-Juybari, H.</au><au>Marashi, M.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD)</atitle><jtitle>Journal of materials science. Materials in electronics</jtitle><stitle>J Mater Sci: Mater Electron</stitle><date>2016</date><risdate>2016</risdate><volume>27</volume><issue>1</issue><spage>921</spage><epage>930</epage><pages>921-930</pages><issn>0957-4522</issn><eissn>1573-482X</eissn><abstract>In this research, SnO
2
films were prepared by atmospheric pressure chemical vapor deposition technique on a glass substrate. Then, the effects of oxygen and nitrogen flow rates and deposition time on the structural, optical and electrical properties of the thin films were studied. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, atomic force microscopy, electrical resistance measurements using two-point probe technique, Hall Effect, photo-conductivity effect and optical absorption (UV–Vis). The films had uniform polycrystalline structure. The average optical band gap of the films was 3.8 eV. The results of Hall Effect showed that majority carriers were n-type and carrier concentration varies in the range of 5.84 × 10
18
–1.89 × 10
19
cm
−3
. Increasing oxygen flow rate led to increasing the specific resistance, photosensitivity and Seebeck coefficient (at 350 K), and also decreasing optical band gap, mean grain size and surface roughness plus higher XRD peaks. Increasing nitrogen flow rate led to decreasing optical band gap, specific resistance, and photosensitivity and Seebeck coefficient (at 350 K). Increasing the deposition time led to an increase–decrease trend in the optical band gap, a decrease–increase trend in specific resistance and an increase in photosensitivity and Seebeck coefficient (at 350 K). The average transmittance and optical band gap of films were 82 % and 3.8 eV, respectively. Hall Effect studies revealed that the films exhibit n-type conductivity.</abstract><cop>New York</cop><pub>Springer US</pub><doi>10.1007/s10854-015-3835-0</doi><tpages>10</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0957-4522 |
ispartof | Journal of materials science. Materials in electronics, 2016, Vol.27 (1), p.921-930 |
issn | 0957-4522 1573-482X |
language | eng |
recordid | cdi_proquest_journals_1755754671 |
source | Springer Link |
subjects | Characterization and Evaluation of Materials Chemistry and Materials Science Materials Science Optical and Electronic Materials |
title | Dependence of O2, N2 flow rate and deposition time on the structural, electrical and optical properties of SnO2 thin films deposited by atmospheric pressure chemical vapor deposition (APCVD) |
url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-02T17%3A40%3A22IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Dependence%20of%20O2,%20N2%20flow%20rate%20and%20deposition%20time%20on%20the%20structural,%20electrical%20and%20optical%20properties%20of%20SnO2%20thin%20films%20deposited%20by%20atmospheric%20pressure%20chemical%20vapor%20deposition%20(APCVD)&rft.jtitle=Journal%20of%20materials%20science.%20Materials%20in%20electronics&rft.au=Fadavieslam,%20M.%20R.&rft.date=2016&rft.volume=27&rft.issue=1&rft.spage=921&rft.epage=930&rft.pages=921-930&rft.issn=0957-4522&rft.eissn=1573-482X&rft_id=info:doi/10.1007/s10854-015-3835-0&rft_dat=%3Cproquest_cross%3E3917361671%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c3010-5584acc50a2c83cb4b821c520776b8281b9f36e319ac3cf96cf904b1796dd4dc3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=1755754671&rft_id=info:pmid/&rfr_iscdi=true |