A monolithically integrated high-efficiency Cu(In,Ga)Se2 mini-module structured solely by laser

• Published in: Progress in photovoltaics 2015-12, Vol.23 (12), p.1908-1915
• Main Authors: Nishiwaki, Shiro, Burn, Andreas, Buecheler, Stephan, Muralt, Martin, Pilz, Sönke, Romano, Valerio, Witte, Reiner, Krainer, Lukas, Spühler, Gabriel J., Tiwari, Ayodhya N.
• Format: Article
• Language: English
• Subjects: all laser structuring; mini-module
• ISSN: 1062-7995; 1099-159X
• DOI: 10.1002/pip.2583

Monolithically integrated Cu(In,Ga)Se2 mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se2 layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd. Monolithically integrated Cu(In,Ga)Se2 mini‐modules were fabricated in order to reduce the width of patterning related dead area. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. The laser structuring realized the dead area width of about 70 μm. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%.