Optical Tolerance Analysis of the Multi-Beam Limb Viewing Instrument STEAMR

• Published in: IEEE transactions on terahertz science and technology 2014-11, Vol.4 (6), p.714-721
• Main Authors: Hammar, Arvid, Whale, Mark, Forsberg, Per, Murk, Axel, Emrich, Anders, Stake, Jan
• Format: Article
• Language: English
• Subjects: Adaptive optics; Integrated optics; Limb viewing; Monte Carlo; Monte Carlo methods; Monte Carlo simulation; multi-beam; Optical distortion; Optical receivers; quasi-optics; STEAMR; Stratosphere-Troposphere Exchange And climate Monitor Radiometer (STEAMR); Submillimeter wave devices; submillimeter wave instruments; Tolerance analysis
• ISSN: 2156-342X; 2156-3446; 2156-3446
• DOI: 10.1109/TTHZ.2014.2361616

In this paper, we report on an optical tolerance analysis of the submillimeter atmospheric multi-beam limb sounder, STEAMR. Physical optics and ray-tracing methods were used to quantify and separate errors in beam pointing and distortion due to reflector misalignment and primary reflector surface deformations. Simulations were performed concurrently with the manufacturing of a multi-beam demonstrator of the relay optical system which shapes and images the beams to their corresponding receiver feed horns. Results from Monte Carlo simulations show that the inserts used for reflector mounting should be positioned with an overall accuracy better than 100 μm (~ 1/10 wavelength). Analyses of primary reflector surface deformations show that a deviation of magnitude 100 μm can be tolerable before deployment, whereas the corresponding variations should be less than 30 μm during operation. The most sensitive optical elements in terms of misalignments are found near the focal plane. This localized sensitivity is attributed to the off-axis nature of the beams at this location. Post-assembly mechanical measurements of the reflectors in the demonstrator show that alignment better than 50 μm could be obtained.