Analysis and Design Considerations of Integrated 3-Level Buck Converters

• Published in: IEEE transactions on circuits and systems. I, Regular papers Regular papers, 2016-05, Vol.63 (5), p.671-682
• Main Authors: Xun Liu, Mok, Philip K. T., Junmin Jiang, Wing-Hung Ki
• Format: Article
• Language: English
• Subjects: 3-level buck converters; Buck converters; Capacitors; Conversion ratio; Design analysis; Electric potential; Flight; Flying; Inductors; Integrated circuit modeling; Loop gain; Modulation; MOS parasitic capacitors; power converter modeling; power integrated circuits; small signal injection simulation; state-space averaging; Switches; Topology; transfer function; Voltage
• ISSN: 1549-8328; 1558-0806
• DOI: 10.1109/TCSI.2016.2556098

This paper presents a systematic analysis of integrated 3-level buck converters under both ideal and real conditions as a guidance for designing robust and fast 3-level buck converters. Under ideal conditions, the voltage conversion ratio, the output voltage ripple and, in particular, the system's loop-gain function are derived. Design considerations for real circuitry implementations of an integrated 3-level converter, such as the implementation of the flying capacitor, the impacts of the parasitic capacitors of the flying capacitor and the 4 power switches, and the time mismatch between the 2 duty-cycle signals are thoroughly discussed. Under these conditions, the voltage conversion ratio, the voltage across the flying capacitor and the power efficiency are analyzed and verified with Cadence simulation results. The loop-gain function of an integrated 3-level buck converter with parasitic capacitors and time mismatch is derived with the state-space averaging method. The derived loop-gain functions are verified with time-domain small signal injection simulation and measurement, with a good match between the analytical and experimental results.