Numerical Tests of the Virtual Human Model Response Under Dynamic Load Conditions Defined in Federal Aviation Regulation Part 23.562 and 25.562 - Preliminary Study

• Published in: Archive of Mechanical Engineering 2016-12, Vol.63 (4), p.511-530
• Main Authors: Lindstedt, Lukasz, Vychytil, Jan, Dziewonski, Tomasz, Hyncik, Ludek
• Format: Article
• Language: English
• Subjects: computer simulations; human models; seat certification; Virthuman
• ISSN: 0004-0738; 2300-1895
• DOI: 10.1515/meceng-2016-0029

The main aim of the presented research was to check mechanical response of human body model under loads that can occur during airplane accidents and compare results of analysis with some results of experimental tests described in literature. In simulations, new multi-purpose human body model, the VIRTHUMAN, was used. The whole model, as well as its particular segments, was earlier validated based on experimental data, which proved its accuracy to simulate human body dynamic response under condition typical for car crashes, but it was not validated for loads with predominant vertical component (loads acting along spinal column), typical for airplane crashes. Due to limitation of available experimental data, the authors focused on conducting calculations for the case introduced in 14 CFR: Parts 23.562 and 25.562, paragraph (b)(1), knowing as the 60° pitch test. The analysis consists in comparison of compression load measured in lumbar section of spine of the FAA HIII Dummy (experimental model) and in the Virthuman (numerical model). The performed analyses show numerical stability of the model and satisfactory agreement between experimental data and simulated Virthuman responses. In that sense, the Virthuman model, although originally developed for automotive analyses, shows also great potential to become valuable tool for applications in aviation crashworthiness and safety analyses, as well.