Anisotropic Thermal Diffusivities of Plasma-Sprayed Thermal Barrier Coatings

• Published in: International journal of thermophysics 2017-09, Vol.38 (9), Article 134
• Main Authors: Akoshima, Megumi, Takahashi, Satoru
• Format: Article
• Language: English
• Subjects: Anisotropy; Asian Thermophysical Properties Conference; ATPC 2016: Selected Papers of the 11th Asian Thermophysical Properties Conference; Classical Mechanics; Coatings; Condensed Matter Physics; Diffusivity; Evaluation; Gas turbines; Geophysics; Heat conductivity; Heat transfer; Industrial Chemistry/Chemical Engineering; Microstructure; Physical Chemistry; Physics; Spraying; Substrates; Superalloys; Temperature distribution; Thermal barrier coatings; Thermal conductivity; Thermal design; Thermal diffusivity; Thermal energy; Thermodynamics; Turbine blades; Yttria-stabilized zirconia; Yttrium oxide
• ISSN: 0195-928X; 1572-9567
• DOI: 10.1007/s10765-017-2267-x

Thermal barrier coatings (TBCs) are used to shield the blades of gas turbines from heat and wear. There is a pressing need to evaluate the thermal conductivity of TBCs in the thermal design of advanced gas turbines with high energy efficiency. These TBCs consist of a ceramic-based top coat and a bond coat on a superalloy substrate. Usually, the focus is on the thermal conductivity in the thickness direction of the TBC because heat tends to diffuse from the surface of the top coat to the substrate. However, the in-plane thermal conductivity is also important in the thermal design of gas turbines because the temperature distribution within the turbine cannot be ignored. Accordingly, a method is developed in this study for measuring the in-plane thermal diffusivity of the top coat. Yttria-stabilized zirconia top coats are prepared by thermal spraying under different conditions. The in-plane and cross-plane thermal diffusivities of the top coats are measured by the flash method to investigate the anisotropy of thermal conduction in a TBC. It is found that the in-plane thermal diffusivity is higher than the cross-plane one for each top coat and that the top coats have significantly anisotropic thermal diffusivity. The cross-sectional and in-plane microstructures of the top coats are observed, from which their porosities are evaluated. The thermal diffusivity and its anisotropy are discussed in detail in relation to microstructure and porosity.