Study on the Fluid–Structure Interaction at Different Layout of Stacked Chip in Molded Packaging

• Published in: Arabian journal for science and engineering (2011) 2017-11, Vol.42 (11), p.4743-4757
• Main Authors: Ishak, M. H. H., Abdullah, M. Z., Aziz, M. S. Abdul, Saad, A. A., Abdullah, M. K., Loh, W. K., Ooi, R. C., Ooi, C. K.
• Format: Article
• Language: English
• Subjects: Deformation; Digital cameras; Displacement molding; Encapsulation; Engineering; Fluid-structure interaction; Humanities and Social Sciences; multidisciplinary; Packaging; Pressure distribution; Research Article - Mechanical Engineering; Science; Silicon; Solvers; Stress concentration
• ISSN: 2193-567X; 1319-8025; 2191-4281
• DOI: 10.1007/s13369-017-2659-z

This study investigates fluid–structure interaction (FSI) analysis of stacked chip in the encapsulation of molded underfill packaging using ANSYS Coupling Work bench with fluid and structural solvers. During encapsulation, FSI analysis is applied to a molded package with different layouts, namely cases 1–4 of stacked chip. An even ratio of inlet and outlet gate pressures is used to produce a regular melt front advancement. An experimental setup is fabricated to validate the simulation results in the FSI study. A digital camera is used to capture the melt front advancement and structural deformation. The interaction between structures (silicon chip) and epoxy molding compound (EMC) is displayed in the displacement profile. Maximum deformation is evaluated during the final stage of filling. The silicon die experiences von Mises stresses, which are monitored to observe the risk of die cracking. The results of this study showed that, the EMC flow front advancement was the fastest in case 4. The pressure distribution of each case was nearly identical, and the maximum von Mises stress was distributed unevenly at the middle of the stacked chip. The proposed analysis can serve as a reference and guide in designing and improving 3D integration packages in industry.