Loading…
Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck
•Experimental study to implement fluidic thrust vectoring using transverse jet injection.•Elliptic exit and triangular shaped aft-deck.•Detailed pressure, PIV and thrust measurements.•Secondary-jet injection creates a virtual exit plane at an angle resulting in the turning of the core-jet.•The angle...
Saved in:
Published in: | Experimental thermal and fluid science 2017-09, Vol.86, p.189-203 |
---|---|
Main Authors: | , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
cited_by | cdi_FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3 |
---|---|
cites | cdi_FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3 |
container_end_page | 203 |
container_issue | |
container_start_page | 189 |
container_title | Experimental thermal and fluid science |
container_volume | 86 |
creator | Chandra Sekar, T. Kushari, A. Mody, B. Uthup, B. |
description | •Experimental study to implement fluidic thrust vectoring using transverse jet injection.•Elliptic exit and triangular shaped aft-deck.•Detailed pressure, PIV and thrust measurements.•Secondary-jet injection creates a virtual exit plane at an angle resulting in the turning of the core-jet.•The angle of the vectoring increases with increase in momentum of the secondary-jet but only up to a certain maximum.
This paper summarizes the results of an experimental study carried out to implement fluidic thrust vectoring in yaw direction using transverse jet injection in a converging nozzle with an elliptic exit and triangular shaped aft-deck. The study was restricted to low subsonic flow regime typical for Unmanned Aerial Vehicle (UAV) applications. The momentum of the core nozzle flow was kept constant while varying the momentum of the secondary-jet. The surface pressure distribution, exhaust jet velocity field and thrust were measured. Secondary-jet injection was found to create a virtual exit plane at an angle to the stream wise direction of the nozzle flow resulting in the turning of the core-jet away from the injection slot and turning the direction of thrust (termed vectored thrust). The angle of the vectoring was found to increase with increase in momentum of the secondary-jet but only up to a certain maximum. The vectoring was found to increase the static pressure at the nozzle inlet, which is a very crucial observation in this study as it is directly related to engine performance. The secondary-jet injection was found to reduce the width of the core-jet and the magnitude of this reduction was found to increase in stream wise direction and also increase with increase in the momentum of the secondary-jet. Core flow behavior was different in the region with aft-deck compared to region without aft-deck. Jet spreading was expedited by the secondary-jet and aft-deck. Multiple shear layers were present in the flow with the secondary-jet switched on, which were otherwise absent. Secondary-jet injection was found to result in the formation of vortices with axes oriented along the direction of the secondary-jet at the injection slot and these vortices convect downstream with the core flow. These vortices were found to excite the shear layer, resulting in better jet mixing and hence augment the mass entrainment by the core flow. |
doi_str_mv | 10.1016/j.expthermflusci.2017.04.017 |
format | article |
fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_journals_2030207903</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0894177717301152</els_id><sourcerecordid>2030207903</sourcerecordid><originalsourceid>FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3</originalsourceid><addsrcrecordid>eNqNkE1LAzEQhoMoWKv_IaDXXScf3WTBi4hVoeBFb0LYZmfbrO1uTbJV--tNqRdvXuYdmGe-XkKuGOQMWHHd5vi1iUv062Y1BOtyDkzlIPMkR2TEtCozznVxTEagS5kxpdQpOQuhBQDNGYzI23Q1uNpZGpd-CJFu0cbeu25Bh7CP0Vdd2KIPSFuM1HVtAlzfpYxW1PZdqi32YNfvdiukny4uadXErEb7fk5OmmoV8OJXx-R1ev9y95jNnh-e7m5nmRUTHdNZyEsp6mYuWV0pqRQvWMNlMbET1LJWlYBCS1tAydhcNFwrDVqXginBJ8KKMbk8zN34_mPAEE3bD75LKw0HARxUCSJRNwfK-j4Ej43ZeLeu_LdhYPZ-mtb89dPs_TQgTZLUPj20Y_pk69CbRGBnsXY-eWLq3v1v0A_xyIeN</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2030207903</pqid></control><display><type>article</type><title>Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck</title><source>ScienceDirect Freedom Collection 2022-2024</source><creator>Chandra Sekar, T. ; Kushari, A. ; Mody, B. ; Uthup, B.</creator><creatorcontrib>Chandra Sekar, T. ; Kushari, A. ; Mody, B. ; Uthup, B.</creatorcontrib><description>•Experimental study to implement fluidic thrust vectoring using transverse jet injection.•Elliptic exit and triangular shaped aft-deck.•Detailed pressure, PIV and thrust measurements.•Secondary-jet injection creates a virtual exit plane at an angle resulting in the turning of the core-jet.•The angle of the vectoring increases with increase in momentum of the secondary-jet but only up to a certain maximum.
This paper summarizes the results of an experimental study carried out to implement fluidic thrust vectoring in yaw direction using transverse jet injection in a converging nozzle with an elliptic exit and triangular shaped aft-deck. The study was restricted to low subsonic flow regime typical for Unmanned Aerial Vehicle (UAV) applications. The momentum of the core nozzle flow was kept constant while varying the momentum of the secondary-jet. The surface pressure distribution, exhaust jet velocity field and thrust were measured. Secondary-jet injection was found to create a virtual exit plane at an angle to the stream wise direction of the nozzle flow resulting in the turning of the core-jet away from the injection slot and turning the direction of thrust (termed vectored thrust). The angle of the vectoring was found to increase with increase in momentum of the secondary-jet but only up to a certain maximum. The vectoring was found to increase the static pressure at the nozzle inlet, which is a very crucial observation in this study as it is directly related to engine performance. The secondary-jet injection was found to reduce the width of the core-jet and the magnitude of this reduction was found to increase in stream wise direction and also increase with increase in the momentum of the secondary-jet. Core flow behavior was different in the region with aft-deck compared to region without aft-deck. Jet spreading was expedited by the secondary-jet and aft-deck. Multiple shear layers were present in the flow with the secondary-jet switched on, which were otherwise absent. Secondary-jet injection was found to result in the formation of vortices with axes oriented along the direction of the secondary-jet at the injection slot and these vortices convect downstream with the core flow. These vortices were found to excite the shear layer, resulting in better jet mixing and hence augment the mass entrainment by the core flow.</description><identifier>ISSN: 0894-1777</identifier><identifier>EISSN: 1879-2286</identifier><identifier>DOI: 10.1016/j.expthermflusci.2017.04.017</identifier><language>eng</language><publisher>Philadelphia: Elsevier Inc</publisher><subject>Active control ; Aft-deck ; Convergence ; Core flow ; Decks ; Entrainment ; Fluid dynamics ; Fluid flow ; Injection ; Jet mixing ; Mass entrainment ; Nozzle flow ; Nozzles ; Pressure ; Pressure distribution ; Shear layers ; Static pressure ; Stress concentration ; Subsonic flow ; Thrust vector control ; Thrust vectoring ; Unmanned aerial vehicles ; Velocity distribution ; Vortices ; Yaw</subject><ispartof>Experimental thermal and fluid science, 2017-09, Vol.86, p.189-203</ispartof><rights>2017 Elsevier Inc.</rights><rights>Copyright Elsevier Science Ltd. Sep 2017</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3</citedby><cites>FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Chandra Sekar, T.</creatorcontrib><creatorcontrib>Kushari, A.</creatorcontrib><creatorcontrib>Mody, B.</creatorcontrib><creatorcontrib>Uthup, B.</creatorcontrib><title>Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck</title><title>Experimental thermal and fluid science</title><description>•Experimental study to implement fluidic thrust vectoring using transverse jet injection.•Elliptic exit and triangular shaped aft-deck.•Detailed pressure, PIV and thrust measurements.•Secondary-jet injection creates a virtual exit plane at an angle resulting in the turning of the core-jet.•The angle of the vectoring increases with increase in momentum of the secondary-jet but only up to a certain maximum.
This paper summarizes the results of an experimental study carried out to implement fluidic thrust vectoring in yaw direction using transverse jet injection in a converging nozzle with an elliptic exit and triangular shaped aft-deck. The study was restricted to low subsonic flow regime typical for Unmanned Aerial Vehicle (UAV) applications. The momentum of the core nozzle flow was kept constant while varying the momentum of the secondary-jet. The surface pressure distribution, exhaust jet velocity field and thrust were measured. Secondary-jet injection was found to create a virtual exit plane at an angle to the stream wise direction of the nozzle flow resulting in the turning of the core-jet away from the injection slot and turning the direction of thrust (termed vectored thrust). The angle of the vectoring was found to increase with increase in momentum of the secondary-jet but only up to a certain maximum. The vectoring was found to increase the static pressure at the nozzle inlet, which is a very crucial observation in this study as it is directly related to engine performance. The secondary-jet injection was found to reduce the width of the core-jet and the magnitude of this reduction was found to increase in stream wise direction and also increase with increase in the momentum of the secondary-jet. Core flow behavior was different in the region with aft-deck compared to region without aft-deck. Jet spreading was expedited by the secondary-jet and aft-deck. Multiple shear layers were present in the flow with the secondary-jet switched on, which were otherwise absent. Secondary-jet injection was found to result in the formation of vortices with axes oriented along the direction of the secondary-jet at the injection slot and these vortices convect downstream with the core flow. These vortices were found to excite the shear layer, resulting in better jet mixing and hence augment the mass entrainment by the core flow.</description><subject>Active control</subject><subject>Aft-deck</subject><subject>Convergence</subject><subject>Core flow</subject><subject>Decks</subject><subject>Entrainment</subject><subject>Fluid dynamics</subject><subject>Fluid flow</subject><subject>Injection</subject><subject>Jet mixing</subject><subject>Mass entrainment</subject><subject>Nozzle flow</subject><subject>Nozzles</subject><subject>Pressure</subject><subject>Pressure distribution</subject><subject>Shear layers</subject><subject>Static pressure</subject><subject>Stress concentration</subject><subject>Subsonic flow</subject><subject>Thrust vector control</subject><subject>Thrust vectoring</subject><subject>Unmanned aerial vehicles</subject><subject>Velocity distribution</subject><subject>Vortices</subject><subject>Yaw</subject><issn>0894-1777</issn><issn>1879-2286</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2017</creationdate><recordtype>article</recordtype><recordid>eNqNkE1LAzEQhoMoWKv_IaDXXScf3WTBi4hVoeBFb0LYZmfbrO1uTbJV--tNqRdvXuYdmGe-XkKuGOQMWHHd5vi1iUv062Y1BOtyDkzlIPMkR2TEtCozznVxTEagS5kxpdQpOQuhBQDNGYzI23Q1uNpZGpd-CJFu0cbeu25Bh7CP0Vdd2KIPSFuM1HVtAlzfpYxW1PZdqi32YNfvdiukny4uadXErEb7fk5OmmoV8OJXx-R1ev9y95jNnh-e7m5nmRUTHdNZyEsp6mYuWV0pqRQvWMNlMbET1LJWlYBCS1tAydhcNFwrDVqXginBJ8KKMbk8zN34_mPAEE3bD75LKw0HARxUCSJRNwfK-j4Ej43ZeLeu_LdhYPZ-mtb89dPs_TQgTZLUPj20Y_pk69CbRGBnsXY-eWLq3v1v0A_xyIeN</recordid><startdate>20170901</startdate><enddate>20170901</enddate><creator>Chandra Sekar, T.</creator><creator>Kushari, A.</creator><creator>Mody, B.</creator><creator>Uthup, B.</creator><general>Elsevier Inc</general><general>Elsevier Science Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>7QH</scope><scope>7TB</scope><scope>7U5</scope><scope>7UA</scope><scope>8FD</scope><scope>C1K</scope><scope>FR3</scope><scope>H8D</scope><scope>KR7</scope><scope>L7M</scope></search><sort><creationdate>20170901</creationdate><title>Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck</title><author>Chandra Sekar, T. ; Kushari, A. ; Mody, B. ; Uthup, B.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2017</creationdate><topic>Active control</topic><topic>Aft-deck</topic><topic>Convergence</topic><topic>Core flow</topic><topic>Decks</topic><topic>Entrainment</topic><topic>Fluid dynamics</topic><topic>Fluid flow</topic><topic>Injection</topic><topic>Jet mixing</topic><topic>Mass entrainment</topic><topic>Nozzle flow</topic><topic>Nozzles</topic><topic>Pressure</topic><topic>Pressure distribution</topic><topic>Shear layers</topic><topic>Static pressure</topic><topic>Stress concentration</topic><topic>Subsonic flow</topic><topic>Thrust vector control</topic><topic>Thrust vectoring</topic><topic>Unmanned aerial vehicles</topic><topic>Velocity distribution</topic><topic>Vortices</topic><topic>Yaw</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Chandra Sekar, T.</creatorcontrib><creatorcontrib>Kushari, A.</creatorcontrib><creatorcontrib>Mody, B.</creatorcontrib><creatorcontrib>Uthup, B.</creatorcontrib><collection>CrossRef</collection><collection>Aqualine</collection><collection>Mechanical & Transportation Engineering Abstracts</collection><collection>Solid State and Superconductivity Abstracts</collection><collection>Water Resources Abstracts</collection><collection>Technology Research Database</collection><collection>Environmental Sciences and Pollution Management</collection><collection>Engineering Research Database</collection><collection>Aerospace Database</collection><collection>Civil Engineering Abstracts</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Experimental thermal and fluid science</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Chandra Sekar, T.</au><au>Kushari, A.</au><au>Mody, B.</au><au>Uthup, B.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck</atitle><jtitle>Experimental thermal and fluid science</jtitle><date>2017-09-01</date><risdate>2017</risdate><volume>86</volume><spage>189</spage><epage>203</epage><pages>189-203</pages><issn>0894-1777</issn><eissn>1879-2286</eissn><abstract>•Experimental study to implement fluidic thrust vectoring using transverse jet injection.•Elliptic exit and triangular shaped aft-deck.•Detailed pressure, PIV and thrust measurements.•Secondary-jet injection creates a virtual exit plane at an angle resulting in the turning of the core-jet.•The angle of the vectoring increases with increase in momentum of the secondary-jet but only up to a certain maximum.
This paper summarizes the results of an experimental study carried out to implement fluidic thrust vectoring in yaw direction using transverse jet injection in a converging nozzle with an elliptic exit and triangular shaped aft-deck. The study was restricted to low subsonic flow regime typical for Unmanned Aerial Vehicle (UAV) applications. The momentum of the core nozzle flow was kept constant while varying the momentum of the secondary-jet. The surface pressure distribution, exhaust jet velocity field and thrust were measured. Secondary-jet injection was found to create a virtual exit plane at an angle to the stream wise direction of the nozzle flow resulting in the turning of the core-jet away from the injection slot and turning the direction of thrust (termed vectored thrust). The angle of the vectoring was found to increase with increase in momentum of the secondary-jet but only up to a certain maximum. The vectoring was found to increase the static pressure at the nozzle inlet, which is a very crucial observation in this study as it is directly related to engine performance. The secondary-jet injection was found to reduce the width of the core-jet and the magnitude of this reduction was found to increase in stream wise direction and also increase with increase in the momentum of the secondary-jet. Core flow behavior was different in the region with aft-deck compared to region without aft-deck. Jet spreading was expedited by the secondary-jet and aft-deck. Multiple shear layers were present in the flow with the secondary-jet switched on, which were otherwise absent. Secondary-jet injection was found to result in the formation of vortices with axes oriented along the direction of the secondary-jet at the injection slot and these vortices convect downstream with the core flow. These vortices were found to excite the shear layer, resulting in better jet mixing and hence augment the mass entrainment by the core flow.</abstract><cop>Philadelphia</cop><pub>Elsevier Inc</pub><doi>10.1016/j.expthermflusci.2017.04.017</doi><tpages>15</tpages></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0894-1777 |
ispartof | Experimental thermal and fluid science, 2017-09, Vol.86, p.189-203 |
issn | 0894-1777 1879-2286 |
language | eng |
recordid | cdi_proquest_journals_2030207903 |
source | ScienceDirect Freedom Collection 2022-2024 |
subjects | Active control Aft-deck Convergence Core flow Decks Entrainment Fluid dynamics Fluid flow Injection Jet mixing Mass entrainment Nozzle flow Nozzles Pressure Pressure distribution Shear layers Static pressure Stress concentration Subsonic flow Thrust vector control Thrust vectoring Unmanned aerial vehicles Velocity distribution Vortices Yaw |
title | Fluidic thrust vectoring using transverse jet injection in a converging nozzle with aft-deck |
url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-04T23%3A09%3A07IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Fluidic%20thrust%20vectoring%20using%20transverse%20jet%20injection%20in%20a%20converging%20nozzle%20with%20aft-deck&rft.jtitle=Experimental%20thermal%20and%20fluid%20science&rft.au=Chandra%20Sekar,%20T.&rft.date=2017-09-01&rft.volume=86&rft.spage=189&rft.epage=203&rft.pages=189-203&rft.issn=0894-1777&rft.eissn=1879-2286&rft_id=info:doi/10.1016/j.expthermflusci.2017.04.017&rft_dat=%3Cproquest_cross%3E2030207903%3C/proquest_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c358t-17e2943dfb41da7477261f2465c5e84d7a30684c60911b3f287808893173253c3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_pqid=2030207903&rft_id=info:pmid/&rfr_iscdi=true |