Design and Implementation of a Thomson Parabola for Fluence Dependent Energy-Loss Measurements at the Neutralized Drift Compression eXperiment

• Published in: arXiv.org 2018-09
• Main Authors: Treffert, F, Q Ji, Seidl, P A, Persaud, A, Ludewigt, B, Barnard, J J, Friedman, A, Grote, D P, Gilson, E P, Kaganovich, I D, Stepanov, A, Roth, M, Schenkel, T
• Format: Article
• Language: English
• Subjects: Charged particles; Charging; Computer simulation; Drift; Energy; Energy distribution; Fluence; Foils; Helium; Ion beams; Kinetic energy; Silicon nitride
• ISSN: 2331-8422
• DOI: 10.48550/arxiv.1804.03318

The interaction of ion beams with matter includes the investigation of the basic principles of ion stopping in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stopping in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 10\(^{10}\)-10\(^{11}\) ions, with a peak kinetic energy of ~1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4 %. Successful energy-loss measurements with 1 {\mu}m thick Silicon Nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies.