On the development of a proton conducting solid polymer electrolyte using poly(ethylene oxide)

• Published in: Sustainable energy & fuels 2018, Vol.2 (8), p.1870-1877
• Main Authors: Patra, Sudeshna, Puthirath, Anand B., Vineesh, Thazhe Veettil, Narayanaru, Sreekanth, Soman, Bhaskar, Suriyakumar, Shruti, Stephan, A. Manuel, Narayanan, Tharangattu N.
• Format: Article
• Language: English
• Subjects: Backbone; Conducting polymers; Conductivity; Electrolysis; Electrolytic cells; Ethylene; Ethylene oxide; Fuel cells; Fuel technology; Hopping conduction; Hydrogen; Ion currents; Ion transport; Ions; Lithium; Lithium ions; Mechanical properties; Melt temperature; Membranes; Mimicry; Molten salt electrolytes; Perchloric acid; Polydimethylsiloxane; Polyethylene oxide; Polymers; Protons; Salting; Separators; Solid electrolytes; Solvation
• ISSN: 2398-4902; 2398-4902
• DOI: 10.1039/C8SE00262B

By mimicking the polymer backbone assisted ‘hop and lock’ lithium ion transport in lithium solid polymer (SP) electrolytes, a new type of proton (H + ) transport membrane cum separator is designed which is found to work even in pure water electrolysis. An inexpensive H + transporting SP membrane (HPEOP) is formulated using perchloric acid (HClO 4 ) as the proton source with a poly(ethylene oxide) (PEO) and polydimethylsiloxane blend as the host structure. The H + coordinated PEO backbone via the solvation of HClO 4 allows easy transport of H + through PEO segmental motion and inter-segmental hopping. Humidity dependent ionic conductivity measurements on the optimized HPEOP membrane show higher values in comparison to those of Nafion 117, and a considerable ionic conductivity was shown by HPEOP even in an anhydrous environment (3.165 ± 0.007 mS cm −1 ) unlike Nafion 117 (∼10 −7 mS cm −1 ). Lowering the melting temperature of PEO through HClO 4 ‘salting in’ is found to have a considerable effect in enhancing the conductivity of this SP membrane, while addition of HClO 4 also modifies the microstructure and mechanical strength of the membrane. Water electrolysis ‘H’ cells are constructed with both pure and protonated water using both HPEOP and Nafion separators (membranes), and studies show the possibilities of highly efficient low cost water electrolysis and fuel cells devoid of expensive Nafion membranes.