Preliminary design of a NIR prime focus corrector for the Galileo Telescope

• Published in: arXiv.org 2000-04
• Main Authors: Pernechele, Claudio, Bortoletto, Favio, Conconi, Paolo, Gardiol, Daniele, Molinari, Emilio, Zerbi, Filippo
• Format: Article
• Language: English
• Subjects: Detectors; Focal plane devices; Preliminary designs; Sensors
• ISSN: 2331-8422
• DOI: 10.48550/arxiv.0004085

In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which are aspherical. The first lens diameters are, respectively, of 140 mm and 320 mm for the two kind of detectors. For both designs the telescope pupil is deliberately not re-imaged, and therefore it will not be possible to insert a cold stop. For such a reason particular care has been dedicated to the telescope thermal background study, in order to optimise the baffling system. The optics is able to correct fields of 11' x 11' and of 60'x60', depending on the design. It should be considered that the particular geometry of the focal plane array mosaic does not permit a full exploitation of the entire field, being based on a combination of four detectors. The selected chips are HgCdTe manufactured by Rockwell, i.e. Hawaii I in the 1k x 1k case and Hawaii II in the 2k x 2k case.