Vortical Flow Development in Round Ducts Across Scales for Engine Inlet Applications

• Published in: arXiv.org 2018-08
• Main Authors: Guimarães, Tamara, Lowe, K Todd, O'Brien, Walter F
• Format: Article
• Language: English
• Subjects: Airframes; Boundary layers; Cost analysis; Distortion; Downstream effects; Ducts; Engine inlets; Engine tests; Fluid dynamics; Fluid flow; Fuselages; Ingestion; Inlet flow; Low speed wind tunnels; Particle image velocimetry; Propulsion systems; Reynolds number; Secondary flow; Turbofan engines; Velocity distribution; Velocity measurement; Vortices
• ISSN: 2331-8422
• DOI: 10.48550/arxiv.1808.07273

Turbofan engine performance depends highly on the characteristics and conditions of the inlet flow. Swirl distortions, caused by non-uniformities in flows arising from boundary layer or ground/fuselage vortex ingestion are of concern and need to be fully understood to guarantee efficiency and safety of propulsion systems. To investigate a fundamental single-vortex distortion development in a duct at different Reynolds numbers, a StreamVane distortion generating device was designed and experimentally analyzed in a small-scale low-speed wind tunnel (ReD 500,000) and in a full-scale engine testing rig (ReD 3 million). Stereoscopic particle image velocimetry was used to measure the three-component velocity fields at discrete measurement planes downstream of the distortion device. Results show that the secondary flow is generated and develops very similarly in both scales, and is mostly driven by two-dimensional (2D) vortex dynamics. Induced velocities arising from the proximity of the vortex to the duct wall causes the vortex center to convect circumferentially around the duct, in the same sense as the vortex rotation, as it travels downstream. Small-scale turbulence results show small-scale instabilities related to the development of the vortex. This work shows that the development of this vane-generated, vortex-dominated flow is largely Reynolds number independent for the covered range, so that details of similar duct-bounded flows can be analyzed in depth in small-scale experiments, decreasing development efforts and cost.