Impulse excitation scanning acoustic microscopy for local quantification of Rayleigh surface wave velocity using B-scan analysis

• Published in: Review of scientific instruments 2018-01, Vol.89 (1), p.013706-013706
• Main Authors: Cherry, M., Dierken, J., Boehnlein, T., Pilchak, A., Sathish, S., Grandhi, R.
• Format: Article
• Language: English
• Subjects: Acoustics; Crystallography; Excitation; Filtration; Hilbert transformation; Microscopy; Scanning acoustic microscopy; Scientific apparatus & instruments; Surface waves; Velocity
• ISSN: 0034-6748; 1089-7623
• DOI: 10.1063/1.4998936

A new technique for performing quantitative scanning acoustic microscopy imaging of Rayleigh surface wave (RSW) velocity was developed based on b-scan processing. In this technique, the focused acoustic beam is moved through many defocus distances over the sample and excited with an impulse excitation, and advanced algorithms based on frequency filtering and the Hilbert transform are used to post-process the b-scans to estimate the Rayleigh surface wave velocity. The new method was used to estimate the RSW velocity on an optically flat E6 glass sample, and the velocity was measured at ±2 m/s and the scanning time per point was on the order of 1.0 s, which are both improvement from the previous two-point defocus method. The new method was also applied to the analysis of two titanium samples, and the velocity was estimated with very low standard deviation in certain large grains on the sample. A new behavior was observed with the b-scan analysis technique where the amplitude of the surface wave decayed dramatically on certain crystallographic orientations. The new technique was also compared with previous results, and the new technique has been found to be much more reliable and to have higher contrast than previously possible with impulse excitation.