Loading…
Phase noise suppression through parametric filtering
In this work, we introduce and experimentally demonstrate a parametric phase noise suppression technique, which we call “parametric phase noise filtering.” This technique is based on the use of a solid-state parametric amplifier operating in its instability region and included in a non-autonomous fe...
Saved in:
Published in: | Applied physics letters 2017-02, Vol.110 (6) |
---|---|
Main Authors: | , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | In this work, we introduce and experimentally demonstrate a parametric phase noise suppression technique, which we call “parametric phase noise filtering.” This technique is based on the use of a solid-state parametric amplifier operating in its instability region and included in a non-autonomous feedback loop connected at the output of a noisy oscillator. We demonstrate that such a system behaves as a parametrically driven Duffing resonator and can operate at special points where it becomes largely immune to the phase fluctuations that affect the oscillator output signal. A prototype of a parametric phase noise filter (PFIL) was designed and fabricated to operate in the very-high-frequency range. The PFIL prototype allowed us to significantly reduce the phase noise at the output of a commercial signal generator operating around 220 MHz. Noise reduction of 16 dB (40×) and 13 dB (20×) were obtained, respectively, at 1 and 10 kHz offsets from the carrier frequency. The demonstration of this phase noise suppression technique opens up scenarios in the development of passive and low-cost phase noise cancellation circuits for any application demanding high quality frequency generation. |
---|---|
ISSN: | 0003-6951 1077-3118 |
DOI: | 10.1063/1.4975798 |