Density Changes in Low Pressure Gas Targets for Electron Scattering Experiments

• Published in: arXiv.org 2019-05
• Main Authors: Santiesteban, S N, Alsalmi, S, Meekins, D, Bane, J, Barcus, S, Campbell, J, Castellanos, J, Cruz-Torres, R, Dai, H, Hague, T, Hauenstein, F, Higinbotham, D W, Holt, R J, Kutz, T, S Li, Liu, H, McClellan, R E, Nycz, M, Nguyen, D, Pandey, B, Pandey, V, Schmidt, A, T Su, Z Ye
• Format: Article
• Language: English
• Subjects: Beam currents; Electron beams; Experiments; Gas density; Low pressure gases; Modular systems; Scattering; Tritium
• ISSN: 2331-8422
• DOI: 10.48550/arxiv.1811.12167

A system of modular sealed gas target cells has been developed for use in electron scattering experiments at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). This system was initially developed to complete the MARATHON experiment which required, among other species, tritium as a target material. Thus far, the cells have been loaded with the gas species 3H, 3He, 2H, 1H and 40Ar and operated in nominal beam currents of up to 22.5 uA in Jefferson Lab's Hall A. While the gas density of the cells at the time of loading is known, the density of each gas varies uniquely when heated by the electron beam. To extract experimental cross sections using these cells, density dependence on beam current of each target fluid must be determined. In this study, data from measurements with several beam currents within the range of 2.5 to 22.5 uA on each target fluid are presented. Additionally, expressions for the beam current dependent fluid density of each target are developed.