Hydrokinetic energy harvesting from flow-induced vibration of a circular cylinder with two symmetrical fin-shaped strips

• Published in: Energy (Oxford) 2018-12, Vol.165, p.1259-1281
• Main Authors: Zhu, Hongjun, Gao, Yue
• Format: Article
• Language: English
• Subjects: Circular cylinders; Computational fluid dynamics; Converters; Energy conversion efficiency; Energy efficiency; Energy harvesting; Fin-shaped strips; Flow generated vibrations; Flow stability; Flow-density-speed relationships; Flow-induced vibration; Fluid flow; Fluid mechanics; Fluid power; Fluid-structure interaction; Hydrokinetic energy; Kinetics; Mathematical models; Maximum power density; Numerical analysis; Ocean currents; Placement angle; Power density; Power efficiency; Reynolds number; Staggered configuration; Vibration
• ISSN: 0360-5442; 1873-6785
• DOI: 10.1016/j.energy.2018.10.109

A circular cylinder with a pair of fin-shaped strips symmetrically mounted on its surface is proposed to harness the hydrokinetic energy of ocean currents. The flow induced vibration of a single converter is numerically investigated using a fluid-structure interaction (FSI) approach in Reynolds number range of 30480 ≤ Re ≤ 152400, falling in the TrSL3 flow regime (transition of shear layer 3). The numerical model is validated with the reported data for a cylinder with rectangular strips. By placing a pair of fin-shaped strips on the front surface of the cylinder, the VIV and galloping occur back-to-back. A recirculation region is generated behind the strips, resulting in a disturbance to the flow around the cylinder. The noncircular geometric shape contributes to the hydrodynamic instability, which is enhanced as the flow speed increases. The responses for the cylinder with fins at 20° and 45° fall in hard galloping zone 1, while the responses for fins placed at 0° and 60° belong to hard galloping zone 2. The maximum power of more than 60 W/m is harnessed at uin = 1.5 m/s (a typical ocean current speed). Nevertheless, the power efficiency decreases in galloping as the incoming fluid power increases with the response amplitude. Thus the maximum power efficiency occurs at the VIV upper branch or the onset of galloping. When the strips move to 90°, galloping is disappeared and the vibration is suppressed as the strips further move to 120°. By arranging the converters in a staggered configuration, the maximum power density could reach 441.11 W/m3. •Influence of fin-shaped strips on vibration response and energy harnessing are examined.•Either vibration enhancement or suppression is achieved by adjusting the strip location.•The vibration response is sensitive to the size and location of fin-shaped strips.•Galloping is enhanced by placing strips at 20° and hence the improvement in conversion.•Fin-shaped strips contribute to hydrodynamic instability and shift of separation point.