Effect of bias voltage on the tribological and sealing properties of rubber seals modified by DLC films

• Published in: Surface & coatings technology 2019-02, Vol.360, p.391-399
• Main Authors: Liu, J.Q., Wu, Z.Y., Cao, H.T., Wen, F., Pei, Y.T.
• Format: Article
• Language: English
• Subjects: Bias; Butadiene; Contact mechanics; Diamond-like carbon film; Diamond-like carbon films; Electric potential; Electronics; Leakage; Magnetron sputtering; Modulus of elasticity; Nitrile butadiene rubber; Nitrile rubber; Plasma; Raman spectra; Sealing; Sealing property; Seals (stoppers); Tribology; Wear rate
• ISSN: 0257-8972; 1879-3347
• DOI: 10.1016/j.surfcoat.2018.12.100

Diamond-like carbon (DLC) films were deposited on nitrile butadiene rubber (NBR) by the DC magnetron sputtering under different bias voltages. Raman spectra revealed that the variation of bias voltage could tune the carbon bond structure in DLC films. Both the hardness and Young's modulus increased with the increasing bias voltage. Tribological tests revealed that the DLC-coated NBR prepared at the bias voltage of −200 V exhibited low wear rate due to its high hardness. The sealing property was studied by evaluating the leakage rate of volatile liquid in a simple apparatus. All DLC films resulted in less leakage rate as compared to the raw rubber under large stress. The lowest leakage rate occurred in the DLC-coated NBR prepared with a bias voltage of −200 V, which was associated with the theoretical calculations (Persson's theory). It was attributed to the synergetic effects of the variations of the Young's modulus and root-mean-square (Rms) roughness. The low Young's modulus and Rms, controlled by regulating bias voltage, could enhance actual contact area and reduce the leakage rate. •Tribology property of diamond-like carbon film on rubber is tuned by bias voltage.•The coated diamond-like carbon film on rubber can impede the leakage.•Bias voltage can control the sealing property of coated nitrile butadiene rubber.