Optimizing of Gold Nanoparticles on Porous Silicon Morphologies for a Sensitive Carbon Monoxide Gas Sensor Device

• Published in: Plasmonics (Norwell, Mass.) Mass.), 2019-04, Vol.14 (2), p.501-509
• Main Authors: Dheyab, Amer B., Alwan, Alwan M., Zayer, Mehdi Q.
• Format: Article
• Language: English
• Subjects: Biochemistry; Biological and Medical Physics; Biophysics; Biotechnology; Carbon monoxide; Chemistry; Chemistry and Materials Science; Chloroauric acid; Electrochemical etching; Gas sensors; Gold; Illumination; Low pressure; Morphology; Nanoparticles; Nanotechnology; Photoluminescence; Porous silicon; Scanning electron microscopy; Silicon; Substrates; X-ray diffraction
• ISSN: 1557-1955; 1557-1963
• DOI: 10.1007/s11468-018-0828-x

A set of carbon monoxide (CO) gas sensors based on porous silicon (PSi)/gold nanoparticle (AuNP) hetro structures were fabricated. Different forms of PSi surface morphologies were studied as a substrate for growth of AuNPs. Simple dipping process of PSi in hydrogen tetrachloroaurate (III) solution (HAuCl 4 ) at fixed concentrations of 10 −2  M/3.5 HF was used to synthesize AuNPs. The n-type PSi was equipped through photo-electrochemical etching process at current density value of 10 mA/cm 2 under illumination condition of 530-nm wavelength and laser illumination intensity of 20 to 80 mW/cm 2 . Three different forms of PSi morphology, meso, macro, and double layers with pore shapes and sizes, were prepared. The structural and surface morphology properties of PSi-based substrate before and after deposition of AuNPs were investigated through studying of scanning electron microscopy (SEM), photoluminescence (PL), and X-ray diffraction (XRD). The electrical property (J-V) was carried out in primary vacuum and CO at low pressure. The results show that PSi surface morphologies strongly influenced the AuNP sizes and hence the sensor performance. It was found that decrease the AuNP sizes could be occasioned in high and fast current response.