Series-Capacitor-Based Buck PFC Converter With High Power Factor and Ultrahigh Step-Down Conversion Ratio

• Published in: IEEE transactions on industrial electronics (1982) 2019-09, Vol.66 (9), p.6895-6905
• Main Authors: Chen, Zhangyong, Zhang, Chenyu, Wu, Yunfeng, Chen, Yong, Zhang, Changhua
• Format: Article
• Language: English
• Subjects: Buck converters; Capacitors; Conversion; Conversion ratio; Converters; Design parameters; Diodes; Discontinuous capacitor voltage mode (DCVM); Electric potential; Energy storage; Harmonic distortion; Inductors; Power factor; Power factor correction; power factor correction (PFC) converter; Reactive power; Stress; Switches; ultrahigh step down ratio
• ISSN: 0278-0046; 1557-9948
• DOI: 10.1109/TIE.2018.2879307

In this paper, a series-capacitor-based interleaving buck power factor correction (PFC) converter is proposed, the intermediate energy storage capacitance of which is operated at discontinuous capacitor voltage mode (DCVM), and automatic power factor (PF) correction for this converter is obtained. Moreover, the voltage across the series capacitor of the proposed PFC converter is clamped at the input voltage, and thus peak voltage stress existed in the traditional DCVM buck PFC could be relieved. By effectively regulating the charge/discharge time for the series capacitor, ultrahigh step-down conversion ratio of the proposed converter is achieved, the conversion ratio of which is independent of the duty cycle and only related to the switching frequency and circuit parameters. Therefore, high PF can be obtained due to very narrow deadtime of the input current. Meanwhile, the proposed PFC converter can realize the soft turn- on of part power switch and soft turn- off of part power diodes. In addition, comparing with the traditional discontinuous inductor current mode PFC, the input current of the proposed PFC converter is continuous so that the peak value and root-mean-square value of input current can be reduced. The operational principle, performance analysis, and parameter design principle are given in this paper. The analysis results show that the PF and total harmonic distortion are also independent of the duty cycle. Finally, a 220-V ac input, 60 W/15 V output experimental prototype is built to verify the validity of the theoretical analysis.