Effect and optimization parameters of phenol removal in emulsion liquid membrane process via fractional-factorial design

•Utilization of blended surfactant in green emulsion liquid membrane formulation.•Palm oil has a high potential as a green solvent in the ELM formulation.•Optimization of process parameters to produce a stable emulsion.•An amount of 83.4% of phenol extraction was achieved while retaining the emulsio...

Full description

Saved in:
Bibliographic Details
Published in:Chemical engineering research & design 2019-05, Vol.145, p.268-278
Main Authors: Rosly, Muhammad Bukhari, Jusoh, Norela, Othman, Norasikin, Rahman, Hilmi Abdul, Noah, Norul Fatiha Mohamed, Sulaiman, Raja Norimie Raja
Format: Article
Language:English
Subjects:
Breakage
Design optimization
Emulsion liquid membrane
Extraction
Factorial design
Ionic liquids
Kerosene
Membrane separation
Optimization
Palm oil
Phase transitions
Phenol
Phenols
Response surface methodology
Sodium hydroxide
Stripping
Surfactants
Wastewater treatment
Water treatment plants
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:•Utilization of blended surfactant in green emulsion liquid membrane formulation.•Palm oil has a high potential as a green solvent in the ELM formulation.•Optimization of process parameters to produce a stable emulsion.•An amount of 83.4% of phenol extraction was achieved while retaining the emulsion stability. Phenol removal from wastewater was investigated and optimized using formulated blended surfactant ionic liquid emulsion liquid membrane. In this research, a mixture of kerosene and palm oil was chosen as a liquid membrane phase medium. The components utilized in the emulsion formulation are palm oil to kerosene (7:3 ratio) as diluent, blended surfactant of Span 80 and Tween 80 as surfactants, ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM]+[NTf2]−) as a stabilizer, and sodium hydroxide (NaOH) as a stripping agent. The experimental of extraction process was designed and optimized using fractional-factorial design and response surface methodology (RSM) respectively. In this study, the optimum process conditions were obtained at an agitation speed of 267 rpm, 5 min of extraction time, 0.107% (w/v) of the concentration of ionic liquid and treat ratio of 1:7.3 where 83% of phenol was extracted in stable duration process without emulsion breakage. Meanwhile, about 11 times enrichment ratio of phenol was recovered as concentrated phenolate solution in the stripping phase. In conclusion, emulsion stability, phenol extraction and recovery could be increased using blended surfactant ionic liquid.
ISSN:0263-8762
1744-3563
DOI:10.1016/j.cherd.2019.03.007