Nickel-catalyzed carbonization of wood for coproduction of functional carbon and fluid fuels II: improved fuel quality of oil fraction and increased heating value of gas fraction

• Published in: Journal of wood science 2009-02, Vol.55 (1), p.60-68
• Main Authors: Suzuki, Kyoko, Suzuki, Tsutomu, Takahashi, Yukio, Okimoto, Mitsuhiro, Yamada, Tetsuo, Okazaki, Noriyasu, Shimizu, Yuichi, Fujiwara, Masashi
• Format: Article
• Language: English
• Subjects: Biomedical and Life Sciences; Broid-Shafizadeh scheme; Calcium; Calorific value; Carbonization; Catalysts; Catalytic converters; Characterization and Evaluation of Materials; Fuels; High temperature; Hydrogen-rich gas; Life Sciences; Materials Science; Nickel; Nickel-catalyzed carbonization; Original Article; System effectiveness; Upgraded oil; Wood Science & Technology
• ISSN: 1435-0211; 1611-4663
• DOI: 10.1007/s10086-008-0989-x

The yields and properties of oil and gas fractions coproduced during carbonization of larch wood loaded with Ni 2%, Ni 2%+Ca 1%, and Ni 4% and without catalyst (None) at 700°-900°C were examined to clarify the catalytic effect in terms of conversion into fluid fuels. The net calorific value of oil occurred mainly below 500°C and increased in the order None < Ni 2% < Ni 4% < Ni 2%+Ca 1%, while the yield decreased in this order. The same order held for the production of gases enriched with hydrogen at 500°-700°C. Even above 800°C, markedly promoted evolution of hydrogen took place for all catalyst systems. These observations confirmed the effectiveness of nickel-catalyzed carbonization at 900°C, particularly Ni 2%+Ca 1%, for both upgrading of oil and gaseous fractions, although the quality of oil was not satisfactory. The catalysis of nickel with and without calcium is discussed on the basis of the modified Broid-Shafizadeh scheme, and the scheme was altered to adapt to the high temperature region where oil was no longer produced.