Equal channel angular extrusion for tube configuration of Al-Zn-Mg-Cu alloy

Microstructural evolution to ultrafine grains and consequently, enhancement of mechanical properties has been recently considered for tube formed specimens using various severe plastic deformation methods. In this research, Al-Zn-Mg-Cu tube was processed by the famous equal channel angular extrusion...

Full description

Saved in:
Bibliographic Details
Published in:Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2018-07, Vol.731, p.569-576
Main Authors: Ebrahimi, M., Shaeri, M.H., Naseri, R., Gode, C.
Format: Article
Language:English
Subjects:
Al-Zn-Mg-Cu tube
Aluminum base alloys
Copper
Equal channel angular extrusion
Grain boundaries
Hardness
Heat treating
Magnesium base alloys
Mechanical properties
Modified Crussard-Jaoul
Parameters
Plastic deformation
Polyurethane resins
Transmission electron microscopy
Ultrafines
Work-hardening capacity
Yield strength
Zinc
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Microstructural evolution to ultrafine grains and consequently, enhancement of mechanical properties has been recently considered for tube formed specimens using various severe plastic deformation methods. In this research, Al-Zn-Mg-Cu tube was processed by the famous equal channel angular extrusion process using a polyurethane mandrel up to two passes at room temperature. Although strength and hardness of the aluminum tube are increased dramatically after the first pass, the aforementioned parameters are enhanced slightly during the second pass of the process. In addition, tube hardness uniformity is decreased remarkably by applying for the first pass and it is improved after the second pass. According to parameters of work-hardening behavior and formability, the flow stress rate of the aluminum tube is reduced by increasing the ECAE pass number. Microstructural analyses showed that low angle and straight grain boundaries of initial sample are transformed into the high angle wavy grain boundaries after introducing the second pass of the process. •ECAE was imposed on tube-formed aluminum alloy via a polyurethane mandrel.•Sample mechanical properties are increased dramatically after the first pass.•Flow stress rate of the sample is reduced by increasing the ECAE pass number.•Low angle and straight grain boundaries of initial sample are transformed into high angle wavy grain boundaries after the process.
ISSN:0921-5093
1873-4936
DOI:10.1016/j.msea.2018.06.080