Experimental investigation of nano-TiO2/turbine meter oil nanofluid

• Published in: Journal of thermal analysis and calorimetry 2019-01, Vol.138 (1), p.57-67
• Main Authors: Pourpasha, Hadi, Saeed Zeinali Heris, Asadi, Alireza
• Format: Article
• Language: English
• Subjects: Abrasion; Additives; Coefficient of friction; Flash point; Friction; Nanofluids; Nanoparticles; Oleic acid; Properties (attributes); Titanium dioxide; Turbines; Viscosity
• ISSN: 1388-6150; 1588-2926
• DOI: 10.1007/s10973-019-08155-2

Today, nanoparticles are used as additives because of their unique properties. The aim of the present research is to investigate the effect of the addition of TiO2 nanoparticles to pure oil on properties such as viscosity, viscosity index, flash point, density, friction coefficient and frictional force in the pin-on-disk system. For this purpose, the nanofluids were synthesized using turbine meter oil as a base oil and TiO2 additive with 0.05, 0.1, 0.2, 0.3, 0.4 and 1 mass% and oleic acid surfactants, followed by testing the mentioned properties. The results show that the kinematic viscosity of the oil is increased with increasing nanoparticles and reducing the temperature. Viscosity index and flash point temperature in 0.4 mass% were increased by 6.65% and 1.77%, respectively. The pour point temperature in 0.05–0.2 mass% was increased by 3%. A pin-on-disk system was used to measure the friction coefficient and the frictional force between the pin and disk in the presence of pure oil and nanofluids after 2 h of abrasion. The results showed that friction coefficient and frictional force were, respectively, decreased by 37.1% and 37.1% by adding 0.1 mass% of TiO2. The depth of the abrasive pins for 4 h was measured by the SEM analysis. The addition of TiO2 nanoparticles showed the lowest abrasion and the most improvement were related to 0.1 mass% TiO2 nanoparticles with a wear depth of 38.46 μm. Compared with turbine meter oil, it shows a 71.43% improvement.