Preformed particle gels of sulfonated polyacrylamide: preparation, characterization, and application as permeability modifier

In this study, a preformed particle gel (PPG) was synthesized from sulfonated polyacrylamide and chromium metal cross-linker with specific concentration. The main characteristics of PPG, such as gelation time, gel fraction, swelling properties and salt sensitivity factor were investigated. The gel f...

Full description

Saved in:
Bibliographic Details
Published in:Iranian polymer journal 2019-12, Vol.28 (12), p.1001-1013
Main Authors: Heidari, Aghdas, Vasheghani-Farahani, Ebrahim, Vafaie-Sefti, Mohsen
Format: Article
Language:English
Subjects:
Avrami equation
Ceramics
Chemistry
Chemistry and Materials Science
Chromium
Composites
Crosslinking
Distilled water
Flooding
Gelation
Gels
Glass
Natural Materials
Nucleation
Original Research
Permeability
Polyacrylamide
Polymer Sciences
Porous media
Resistance factors
Rheological properties
Storage modulus
Swelling
Synthesis
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In this study, a preformed particle gel (PPG) was synthesized from sulfonated polyacrylamide and chromium metal cross-linker with specific concentration. The main characteristics of PPG, such as gelation time, gel fraction, swelling properties and salt sensitivity factor were investigated. The gel fraction of 94.1% practically indicated an appropriate conversion of gelant to the gel. The equilibrium swelling ratios of particle gels in distilled water and formation water at 80 °C were 470.49 and 12.61, respectively. Additionally, the rheological properties of gel were studied by a dynamic rheometer. The ultimate storage modulus of gel was measured 35.4 kPa. The linear viscoelastic behavior was observed at strain between 1 and 82.6% and gel structure was stable up to strain of 1120% with small reduction of storage modulus. The kinetics of gelation were also studied at different temperatures and tested against Avrami equation to determine the kinetic parameters. The Avrami exponents for two kinetic steps were about 2.29 and 0.80, respectively, indicating the rapid formation of the gel network at first step due to nucleation and two-dimensional growths of gel nuclei. Furthermore, a core flooding experiment was conducted to study PPG performance in porous media. The residual resistance factor of water and oil was 41.58 and 12.91, respectively. A value of 3.22 for the ratio of these two factors indicated the ability of the synthesized PPG to decrease water-effective permeability compared to oil-effective permeability in porous media.
ISSN:1026-1265
1735-5265
DOI:10.1007/s13726-019-00759-7