In situ cross-linked poly(ether urethane) elastomer as a binder for high-performance Si anodes of lithium-ion batteries

• Published in: Electrochimica acta 2019-12, Vol.327, p.135011, Article 135011
• Main Authors: Kuo, Tsung-Chieh, Chiou, Chun-Yu, Li, Chia-Chen, Lee, Jyh-Tsung
• Format: Article
• Language: English
• Subjects: Adhesives; Anodes; Binder; Cross-linking; Crosslinking; Differential scanning calorimetry; Diisocyanates; Elastomers; Gallic acid; Glass transition temperature; Liquid chromatography; Lithium; Lithium-ion batteries; NMR; Nuclear magnetic resonance; Poly(ether urethane); Polyetherurethane; Polyethylene glycol; Rechargeable batteries; Silicon; Silicon anode; Spectrum analysis
• ISSN: 0013-4686; 1873-3859
• DOI: 10.1016/j.electacta.2019.135011

In situ cross-linked poly(ether urethane) (PEU) is used as a binder for silicon (Si) anodes of lithium-ion batteries. Methylene di-p-phenyl diisocyanate and poly(ethylene glycol) are polymerized to form cross-linked PEU, while gallic acid is used as a cross-linker. The PEU binders are characterized by infrared spectroscopy, solid-state 13C nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The results of differential scanning calorimetry measurements show that the glass transition temperature of PEU is −23.2 °C, confirming that the binder is an elastomer. Moreover, 180° peeling tests show a dramatic increase in the adhesion force of the Si anode with the cross-linked binder. The charge capacities of the Si anode with the cross-linked binder at C-rates of 0.1, 0.2, 0.5, 1, and 2 C are found to be 3628, 3490, 3156, 2838, and 2491 mAh g−1, respectively, which are higher than those of the Si electrode with a non-cross-linked PEU binder. Furthermore, the Si anode with the in situ cross-linked PEU binder exhibits good cycle-life performance with a specific charge capacity of 2414 mAh g−1 after 100 cycles at 0.2 C. [Display omitted] •In situ cross-linked PEU is used as a binder of Si anodes for Li-ion batteries.•MDI, PEG, and GA are polymerized to form an in situ cross-linked elastic PEU binder.•The performance of anodes with the in situ cross-linked PEU binder is significantly improved.•The in situ cross-linked elastic binder prevents formation of cracks in Si anodes.