The Effect of Steel Slag Coarse Aggregate on the Mechanical and Durability Performances of Concrete

• Published in: Key engineering materials 2020-03, Vol.833, p.228-232
• Main Authors: Miah, Mohammad Shamim, Sultana, Anisa, Shamim, Taukir Ahmed, Miah, Md. Jihad, Alom, Md Ashraful
• Format: Article
• Language: English
• Subjects: Compressive strength; Concrete; Durability; Mechanical properties; Porosity; Slag; Steels; Water absorption
• ISSN: 1013-9826; 1662-9795; 1662-9795
• DOI: 10.4028/www.scientific.net/KEM.833.228

This work performs experimental investigations on concrete made with difference replacement percentage of first-class burnt clay brick aggregate (0, 10, 20, 30, 40, 50, 60, 80, and 100%) by steel slag (SS) aggregate. The aim is to evaluate the mechanical properties as well as durability performances, additionally, water absorption porosity test is performed to investigate the influence of steel slag aggregate on the durability of tested concrete. The experimental results have shown that the compressive strength was improved significantly due to the replacement of brick aggregate by steel slag aggregate. The crushing strength of concrete made with 100% steel slag aggregate has gained up to 70% more than the control concrete (100% brick aggregate). However, the porosity of concrete was reduced with the adding percentage of brick aggregate by steel slag aggregate which is consistent with the compressive strength results. Further, a quite good agreement between compressive strength and porosity was observed as well.