Design and Analysis of Multi-Resonators Loaded Broadband Antipodal Tapered Slot Antenna for Chipless RFID Applications

• Published in: IEEE access 2017-01, Vol.5, p.25798-25807
• Main Authors: Ashraf, Muhammad Ahmad, Alshoudokhi, Yazeed A., Behairy, Hatim Mohammed, Alshareef, Mohammed R., Alshebeili, Saleh A., Issa, Khaled, Fathallah, Habib
• Format: Article
• Language: English
• Subjects: Accuracy; Antennas; Broadband; Broadband antennas; Circuit design; Encoding; Frequencies; High impedance; Impedance; Internet of Things; Microstrip transmission lines; Multi-resonators; Network analysers; Radio frequency identification; Resonators; RFID tags; Robustness (mathematics); Short circuits; Slot antennas; Tags; Time domain analysis; ultra-wideband; Ultrawideband
• ISSN: 2169-3536; 2169-3536
• DOI: 10.1109/ACCESS.2017.2768118

Chipless radio frequency identification (RFID) technology recently observed a growing interest, mainly because of its wide area of applications, and huge potential market, with the advent of Internet of Things era. Recently, in the demonstration of high capacity chipless RFID tags, ultra-wideband technology has been proposed. It can enable development of robust chipless RFID systems with the promising features of low cost, compact, and lightweight. In response, we propose a novel scheme of broadband chipless RFID tagging that is based on slot coupled tapered slot antenna (TSA) loaded with a set of resonators, referred to as multi-resonators filters (MRF). Using numerical simulations, out of 256 combinations, randomly selected 14 different 8-bit MRF circuits operating over the frequency band 4 to 9 GHz are designed and their spectral and time domain responses under short and open terminations are recorded. The time domain signatures, generated due to high impedance mismatches along the microstrip lines of MRFs terminated with open and short circuits, are quantified by finding the cross-correlation among the signals and that is done by calculating the pulse fidelity factor. The designed MRFs are integrated with TSA to develop chipless RFID tags, referred to as MRF-TSA tags. Our designed TSA operates over 3.5-18 GHz band with an average gain that exceeds 6.5 dBi. The retransmitted time domain signals from the MRF-TSA tags are modulated by loading the antenna with MRFs terminated with either short or open loads. The recorded time domain signals are reasonably distinguishable since 85% (96%) of fidelity factor values among the 14 different MRF-TSA tags with open/short termination are less than 0.70 (0.8), respectively. Finally, for verification purposes, two different MRF-TSA based chipless tags are designed and fabricated. RFID monostatic measurements based on the use of vector network analyzer are also reported.