Loading…

Investigations into the effect of process parameters on surface roughness and burr formation during micro end milling of TI-6AL-4V

As micromachining is finding a lot of applications in various fields such as biomedical, avionics, optics, and electronics, it is necessary to produce parts with good surface finish and minimum burr. In this paper, experimental investigations on the effect of spindle speed, feed and depth of cut on...

Full description

Saved in:
Bibliographic Details
Published in:International journal of advanced manufacturing technology 2019-02, Vol.100 (5-8), p.1207-1222
Main Authors: Vipindas, K., Kuriachen, B., Mathew, Jose
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:As micromachining is finding a lot of applications in various fields such as biomedical, avionics, optics, and electronics, it is necessary to produce parts with good surface finish and minimum burr. In this paper, experimental investigations on the effect of spindle speed, feed and depth of cut on various responses such as surface roughness and top burr formation during the micro milling of Ti-6Al-4V with two different carbide tools with a diameter of 0.5 and 1 mm have been carried out. Three levels of cutting parameters with full factorial design were used for the experimentation. The burrs formed on the up milling side of the micro slot were analyzed in this study. A scanning electron microscope (SEM) was used to analyze the burrs formed and was quantified in term of its kerf width. The analysis of variance (ANOVA) was used to find the level of significance of cutting parameters on surface roughness and top burr formation. In addition, statistical predictive models were also developed to predict the responses in terms of cutting parameters. Finally, a cutting strategy was postulated to minimize the top burr in the micro end milling of a slot and was verified for a slot of 0.75-mm width.
ISSN:0268-3768
1433-3015
DOI:10.1007/s00170-016-9210-3