Comparison of thermal insulation performance of vacuum insulation panels with EPS protection layers measured with different methods

• Published in: Energy and buildings 2021-04, Vol.236, p.110771, Article 110771
• Main Authors: Lakatos, Ákos, Kovács, Zsolt
• Format: Article
• Language: English
• Subjects: Aerogels; Construction materials; Energy consumption; Energy efficiency; Equivalence; Heat conductivity; Heat flow; Heat flux; Heat transfer; Heat transmission; Hot box method; Infrared imagery; Infrared imaging; Insulation; Laboratory tests; Laminates; Panels; Polystyrene; Polystyrene resins; Silica; Silica fume; Silicon dioxide; Slabs; Thermal bridges; Thermal conductivity; Thermal insulation; Thermal protection; Thermography; U-value; Vacuum; Vacuum insulation panels
• ISSN: 0378-7788; 1872-6178
• DOI: 10.1016/j.enbuild.2021.110771

[Display omitted] •Heat transfer tests were executed on one side and two side EPS protected VIPs.•70% reduction in the U-values were showed by EPS protected VIPs on brick wall.•Thermal bridge effects were revealed with Infrared thermography.•Novel heat transfer theory of encapsulated VIPs was given.•Equivalent thermal conductivities were given from measurement results of VIPs. For reducing the energy use of buildings, the application of insulation materials can be a possible solution to improve energy efficiency. However, with the continuously tightening regulations, thicker and thicker insulations should be used (e.g., up to 20–25 cm in Hungary and about 40–50 cm in the Nordic countries) to fulfil the directives. In the past decades, developmental research started to focus on both decreasing the thickness and decreasing the thermal conductivity of materials parallels. With this research direction, the investigations of the new type of insulation materials took place. The use of materials having thermal conductivity with less than 0.020 W/mK spread over. These materials are the so-called super insulation materials. Besides Vacuum Insulation Panels (VIPs), aerogel-based materials belong to this group, too. This paper will present laboratory tests executed on two altered types of protected Vacuum Insulation Panels: a one side and a 2 side protected VIP, also called Vacuum Insulation Sandwich (VIS). The first one, type “A” contains 20 mm thick laminated fumed silica, covered with 10 mm thick expanded polystyrene on one side, while type “B” was the one where the 10 mm thick laminated fumed silica core was packed between two 10 mm thick EPS slabs. Firstly, thermal insulation performance was investigated by the so-called guarded hot-box method for U-value, where the samples were placed on a solid brick wall. Furthermore, the thermal insulation performance of protected VIPs was also tested with Hukseflux heat flux plates. To reveal the applicability limits caused by the thermal bridges infrared thermography images (IR) were taken, too. From the images and the measurement results, a theory was formed regarding the heat flow directions inside the encapsulated panels. The current article emphasizes the equivalent thermal conductivity for the assessment of the thermal protection performance of vacuum insulation panels. The paper states that by using VIPs at least, 70% reduction can be reached in the U-value compared to the value of the solid brick wall. Moreover, the