Impact of downhole pressure and fluid-access on the effectiveness of wellbore cement expansion additives

• Published in: Cement and concrete research 2021-09, Vol.147, p.106514, Article 106514
• Main Authors: Wolterbeek, T.K.T., Cornelissen, E.K., Hangx, S.J.T., Spiers, C.J.
• Format: Article
• Language: English
• Subjects: Additives; Annular fluid migration; Cement; Cements; Confining; Crystal growth; Expansion; External pressure; Hydration; Magnesium oxide; MgO; Oil well cement; Shrinkage; Sustained casing pressure; Water consumption; Water supply
• ISSN: 0008-8846; 1873-3948
• DOI: 10.1016/j.cemconres.2021.106514

Autogenous shrinkage of wellbore cement widely impairs zonal isolation. MgO-based cement expansion additives (CEAs) can mitigate this shrinkage, or even impart net expansion, by creating porosity through displacive crystal growth-processes. However, both MgO hydration and autogenous shrinkage behaviour depend strongly on stress state. Evaluation of CEA performance in wellbore cements therefore requires testing under elevated pressures representative for subsurface environments. We report experiments addressing the chemical and bulk volume changes that occur in cement hydrating at 10 MPa confining pressure and 90 °C. Volumetric response was investigated as function of MgO concentration, external water supply, and pore pressure decrease through water consumption during reaction. Results show the bulk expansion achieved using MgO-based CEAs diminishes markedly with increasing effective confining pressure or, equivalently, upon restricting fluid supply. This reduced expansion-potential under pressure has profound implications for slurry design, notably regarding CEA-concentrations required to counteract micro-annulus formation while maintaining low cement permeability.