Flexural Behavior of Aluminum Honeycomb Core Sandwich Structure

• Published in: IOP conference series. Materials Science and Engineering 2017-05, Vol.197 (1), p.12046
• Main Authors: Matta, Vidyasagar, Suresh Kumar, J, Venkataraviteja, Duddu, Reddy, Guggulla Bharath Kumar
• Format: Article
• Language: English
• Subjects: Aluminum; Bearing capacity; Bend tests; Bonding strength; Composite materials; Construction industry; Design of experiments; Epoxy resins; Honey; Honeycomb cores; Laser beam welding; Mathematical analysis; Minimum weight; Orthogonal arrays; Parameter identification; Power presses; Sandwich structures; Shear modulus; Sheets; Stiffness; Taguchi methods; Thermal insulation; Thickness; Weight reduction
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/197/1/012046

This project is concerned with the fabrication and flexural testing of aluminium honey comb sandwich structure which is a special case of composite materials that is fabricated by attaching two thin but stiff skins to a light weight but thick core. The core material is normally low density material but its high thickness provide the sandwich composite with high bonding stiffness. Honeycomb core are classified into two types based on the materials and structures. Hexagonal shape has a unique properties i.e has more bonding strength and less formation time based on the cell size and sheet thickness. Sandwich structure exhibit different properties such as high load bearing capacity at low weight and has excellent thermal insulation. By considering the above properties it has tendency to minimize the structural problem. So honey comb sandwich structure is choosed. The core structure has a different applications such as aircraft, ship interiors, construction industries. As there is no proper research on strength characteristics of sandwich structure. So, we use light weight material to desire the strength. There are different parameters involved in this structure i.e cell size, sheet thickness and core height. In this project we considered 3 level of comparison among the 3 different parameters cell size of 4, 6 and 8 mm, sheet thickness of 0.3, 0.5 and 0.7 mm, and core height of 20,25 and 30 mm. In order to reduce the number of experiment we use taguchi design of experiment, and we select the L8 orthogonal array is the best array for this type of situation, which clearly identifies the parameters by independent of material weight to support this we add the minitab software, to identify the main effective plots and regression equation which involves the individual response and corresponding parameters. Aluminium material is used for the fabrication of Honeycomb sandwich structure among the various grades of aluminium we consider the AL6061 which is light weight material and has more strength. By the power press used as forming method we fabricate the honey comb core and stacking the sheets with adhesive as epoxy resin or laser beam welding and sandwich structure will form with two face sheets. Then the specimen is taken to be tested to know the flexural behaviour by the flexural test as 3 point and 4 pont bend test. After testing of two different tests then we get the force vs displacement curve by this we can know the maximum force and by loading configurations