Excellent piezoelectric performance of Bi-compensated 0.69BiFeO3-0.31BaTiO3 lead-free piezoceramics

• Published in: Journal of materials science. Materials in electronics 2021-09, Vol.32 (17), p.22637-22644
• Main Authors: Yi, Wenbin, Lu, Zhenya, Liu, Xingyue, Huang, Du, Jia, Zhi, Chen, Zhiwu, Wang, Xin, Zhu, Huixiang
• Format: Article
• Language: English
• Subjects: Barium titanates; Characterization and Evaluation of Materials; Chemistry and Materials Science; Compensation; Densification; Ferroelectricity; Grain growth; Lead free; Materials Science; Optical and Electronic Materials; Photoelectrons; Piezoelectric ceramics; Piezoelectricity; Sintering; Solid phases; Spectrum analysis; Temperature; X ray photoelectron spectroscopy
• ISSN: 0957-4522; 1573-482X
• DOI: 10.1007/s10854-021-06748-y

This work focuses on the effects of Bi compensation on the phase structure, microstructure, ferroelectric, and piezoelectric performances of new 0.69Bi 1 +  x FeO 3 -0.31BaTiO 3 ( x , 0–0.08) piezoceramics fabricated by traditional sintering techniques. X-ray diffraction (XRD) results indicated that Bi compensation has slight influences on the phase structure and all the ceramics locate near the morphotropic phase boundary of rhombehedral–pseudocubic phase coexistence. The rhombehedral phase fraction of all the ceramics fluctuates slightly in the range of 41.7–49.1 %. X-ray photoelectron spectroscopy (XPS) results confirmed that Bi compensation favors the decrease in the percentage of oxygen vacancy in the ceramics. An appropriate content of Bi compensation facilitates the densification, grain growth as well as enhancement of piezoelectric property of the materials. In addition, Bi compensation makes the materials “soft” along with the lower E C compared with the no compensation ceramics. Significantly, the excellent piezoelectric performance ( d 33  = 207 pC/N) was achieved in the 0.69Bi 1.04 FeO 3 -0.31BaTiO 3 ceramics, which is higher than the results obtained in the previously reported BiFeO 3 -BaTiO 3 -based ceramics. This work would trigger further study on the BiFeO 3 -BaTiO 3 -based piezoceramics for practical application.