The effect of grain refinement and precipitation strengthening induced by Sc or Er alloying on the mechanical properties of cast Al-Li-Cu-Mg alloys at elevated temperatures

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2021-08, Vol.822, p.141641, Article 141641
• Main Authors: Zhang, Xuejian, Wang, Hongwei, Yan, Bing, Zou, Chunming, Wei, Zunjie
• Format: Article
• Language: English
• Subjects: Aging (metallurgy); Alloying effects; Alloys; Aluminum; Cast Al-Li alloy; Copper; Copper base alloys; Elevated-temperatures mechanical properties; Fracture mechanism; Grain boundary sliding; Grain refinement; Grain size; High temperature; Intergranular fracture; Magnesium; Mechanical properties; Microprocessors; Morphology; Particulate composites; Precipitation hardening; Scandium; Scandium and erbium alloying; Temperature; Zirconium
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2021.141641

In present paper, the effect of Scandium and Erbium alloying on the microstructure evolution and mechanical performance at elevated temperature for Al-Li-Cu-Mg alloy are investigated. Furthermore, the interaction process between shell/core composite particles Al3(M, Zr, Li) (M = Sc/Er) and dislocations is described in the paper. The experimental results indicate that 0.2 wt% Sc addition has much more significant effect upon refining grain of the alloys, compared to equivalent Er addition content. The addition of the both rare elements will obviously facilitates the precipitation density of the shell/core composite Al3(M, Zr, Li) particles in the aging-treated alloys. Moreover, Sc addition will also contribute to promoting the precipitation of plate-like S/S′ phase during aging process. At 200 °C or below, the most excellent mechanical performance of Sc-containing alloy can be attributed to the synthetical effects of the grain refining, dislocation cutting (δ′-Al3Li) and Orowan (shell/core composite Al3(M, Zr, Li) particles) multiples mechanisms, although the fracture morphology of the alloy displays intergranular fracture features. While raising test temperature to 300 °C, it can be observed from the morphology of the Sc-containing alloy that the failure of the grain refining mechanism and the of grain boundary sliding (GBS) occurs that which will damage the high-temperature strength but increase deformation ability of samples. It should be noted that the large grain size and the precipitation of the composite Al3(M, Zr, Li) particles are major reasons for the improvement of elevated-temperatures mechanical properties of the Er-containing alloy. •The effect of Sc and Er alloying on the microstructure evolution of cast Al-Li alloys during aging was investigated.•The effect of Sc or Er alloying on the elevated-temperatures mechanical properties of the cast Al-Li alloys were compared.•The interaction process between Al3(M, Zr, Li) particles and dislocation pairs was discussed for the first time.•The Sc alloying was still works at 200 ℃, while finer grains damaged the tensile stress at 300 ℃.