The effect of noble metal additives on the optimum operating temperature of SnO2 gas sensors

• Main Authors: Mohammad-Yousefi, S., Rahbarpour, S., Ghafoorifard, H.
• Format: Conference Proceeding
• Language: English
• Subjects: Additives; Butanol; Chemical activity; Diffusion theory; Gas sensor; Gas sensors; Gaseous diffusion; Gases; Gold; Heat treatment; Hydrogen atoms; Low operating gas sensor; Metal particles; Noble metal catalyst; Noble metals; Operating temperature; Palladium; Pallets; Physics; Sensors; Surface reactions; Temperature behaviour; Thickness; Tin dioxide
• ISSN: 1742-6588; 1742-6596
• DOI: 10.1088/1742-6596/939/1/012004

The effect of Pd and Au additives on gas sensing properties of SnO2 was investigated. SnO2 pallets were fabricated and sintered at 900 °C for 90 minutes. Several nanometer layers of Pd and Au were deposited on separate SnO2 pallets and were intentionally dispersed into the SnO2 pallets by long heat treatment (400 °C for 1 Day). All metal loaded samples showed significant enhancement in response level and optimum operating temperature compare to pure SnO2 gas sensors. The amount of enhancement was strongly dependent on the material and the thickness of deposited metal layer. Studying butanol response showed that increasing the thickness of metal causes the response level to increase. Further thickness increase caused contrary effect and decreased the performance of sensors. Best results were achieved at 10 nm-thick Au and 7 nm-thick Pd. Generally, Pd-SnO2 samples demonstrated better performance than Au-SnO2 ones, however, Au-SnO2 samples were proved to be good candidate to sense reducing gases with lower hydrogen atoms in their formula. Given experimental results were also good evidence of chemical activity of gold and simply confirms the relation between chemical activity and gold particle size. Results were qualitatively described by gas diffusion theory and surface reactions take place on metal particles.The first section in your paper