The effect of macro-bending on power confinement factor in single mode fibers

• Published in: Journal of physics. Conference series 2018-03, Vol.985 (1), p.12001
• Main Authors: Waluyo, T B, Bayuwati, D, Mulyanto, I
• Format: Article
• Language: English
• Subjects: Bend radius; Mathematical analysis; Physics; Spectrum analysers; Transmission loss
• ISSN: 1742-6588; 1742-6596
• DOI: 10.1088/1742-6596/985/1/012001

One of the methods to determine the macro-bending effect in a single mode fiber is by calculating its power loss coefficient. We describe an alternative method by using the equation of fractional power in the fiber core. Knowing the fiber parameters such as its core radius, refractive indexes, and operating wavelength; we can calculate the V-number and the fractional power in the core. Because the value of the fiber refractive indexes and the propagation constant are affected by bending, we can calculate the value of the fractional power in the core as a function of the bending radius. We calculate the fractional power in the core of an SMF28 and SM600 fiber and, to verify our calculation, we measure its transmission loss using an optical spectrum analyzer. Our calculations and experimental results showed that for SMF28 fiber, there is about 4% power loss due to bending at 633 nm, about 8% at 1310 nm, about 20% at 1550 nm, and about 60% at 1064 nm. For SM600 fiber, there is about 6% power loss due to bending at 633 nm, about 11% at 850 nm, and this fiber is not suitable for operating wavelength beyond 1000 nm.