Wind turbine control applications of turbine-mounted LIDAR

• Published in: Journal of physics. Conference series 2014-12, Vol.555 (1), p.12011
• Main Authors: Bossanyi, E A, Kumar, A, Hugues-Salas, O
• Format: Article
• Language: English
• Subjects: Lidar; Physics; Pitch (inclination); Tracking control; Wind turbines; Yaw
• ISSN: 1742-6588; 1742-6596
• DOI: 10.1088/1742-6596/555/1/012011

In recent years there has been much interest in the possible use of LIDAR systems for improving the performance of wind turbine controllers, by providing preview information about the approaching wind field. Various potential benefits have been suggested, and experimental measurements have sometimes been used to claim surprising gains in performance. This paper reports on an independent study which has used detailed analytical methods for two main purposes: firstly to try to evaluate the likely benefits of LIDAR-assisted control objectively, and secondly to provide advice to LIDAR manufacturers about the characteristics of LIDAR systems which are most likely to be of value for this application. Many different LIDAR configurations were compared: as a general conclusion, systems should be able to sample at least 10 points every second, reasonably distributed around the swept area, and allowing a look-ahead time of a few seconds. An important conclusion is that the main benefit of the LIDAR will be to enhance of collective pitch control to reduce thrust-related fatigue loads; there is some indication that extreme loads can also be reduced, but this depends on other considerations which are discussed in the paper. LIDAR-assisted individual pitch control, optimal Cp tracking and yaw control were also investigated, but the benefits over conventional methods are less clear.