Structural, Mechanical and Electrical Characteristics of Copper Coatings Obtained by Various Electrodeposition Processes

Mechanical (hardness and adhesion) and electrical (sheet resistance) characteristics of electrolytically produced copper coatings have been investigated. Morphologies of Cu coatings produced galvanostatically at two current densities from the basic sulfate electrolyte and from an electrolyte contain...

Full description

Saved in:
Bibliographic Details
Published in:Electronics (Basel) 2022-02, Vol.11 (3), p.443
Main Authors: Mladenović, Ivana O., Bošković, Marko V., Vuksanović, Marija M., Nikolić, Nebojša D., Lamovec, Jelena S., Vasiljević-Radović, Dana G., Radojević, Vesna J.
Format: Article
Language:English
Subjects:
Additives
Adhesion
Annealing
Brightening
Coated electrodes
Coatings
Copper
Current density
Electrical resistivity
Electrolytes
Four point probe method
Glass substrates
Grain boundaries
Grain size
Hardness
Mechanical properties
Microhardness
Morphology
Polyethylene glycol
Software
Topography
Ultrasonic imaging
Ultrasonic testing
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Mechanical (hardness and adhesion) and electrical (sheet resistance) characteristics of electrolytically produced copper coatings have been investigated. Morphologies of Cu coatings produced galvanostatically at two current densities from the basic sulfate electrolyte and from an electrolyte containing levelling/brightening additives without and with application of ultrasound for the electrolyte stirring were characterized by SEM and AFM techniques. Mechanical characteristics were examined by Vickers microindentation using the Chen–Gao (C–G) composite hardness model, while electrical characteristics were examined by the four-point probe method. Application of ultrasound achieved benefits on both hardness and adhesion of the Cu coatings, thereby the use of both the larger current density and additive-free electrolyte improved these mechanical characteristics. The hardness of Cu coatings calculated according to the C–G model was in the 1.1844–1.2303 GPa range for fine-grained Cu coatings obtained from the sulfate electrolyte and in the 0.8572–1.1507 GPa range for smooth Cu coatings obtained from the electrolyte with additives. Analysis of the electrical characteristics of Cu coatings after an aging period of 4 years showed differences in the sheet resistance between the top and the bottom sides of the coating, which is attributed to the formation of a thin oxide layer on the coating surface area.
ISSN:2079-9292
2079-9292
DOI:10.3390/electronics11030443