Hydrogen Production and Degradation of Ciprofloxacin by Ag@TiO2-MoS2 Photocatalysts

• Published in: Catalysts 2022-03, Vol.12 (3), p.267
• Main Authors: Machín, Abniel, Fontánez, Kenneth, García, Diego, Sampayo, Paola, Colón-Cruz, Carla, Claudio-Serrano, Gerardo J., Soto-Vázquez, Loraine, Resto, Edgard, Petrescu, Florian I., Morant, Carmen, Márquez, Francisco
• Format: Article
• Language: English
• Subjects: Antibiotics; Catalysts; Catalytic activity; Chemical reactions; Degradation; High resolution electron microscopy; Hydrogen; Hydrogen production; Metals; Molybdenum; Molybdenum disulfide; Morphology; Nanoparticles; Nanowires; Photocatalysis; Photoelectrons; Raman spectroscopy; Scanning electron microscopy; Silver; Spectrum analysis; Stability tests; Surface area; Titanium; Titanium dioxide; Titanium oxides; Water splitting; X ray photoelectron spectroscopy; X-ray spectroscopy
• ISSN: 2073-4344; 2073-4344
• DOI: 10.3390/catal12030267

The photocatalytic activity of silver-based catalysts containing different amounts of molybdenum disulfide (MoS2; 5, 10 and 20 wt.%) was evaluated by the degradation of the antibiotic ciprofloxacin and the production of hydrogen via water splitting. All the silver (Ag)-based catalysts degraded more than 70% of the antibiotic in 60 min. The catalyst that exhibited the best result was 5%Ag@TiO2-P25-5%MoS2, with ca. 91% of degradation. The control experiments and stability tests showed that photocatalysis was the degradation pathway and the selected silver-based catalysts were stable after seven cycles, with less than 2% loss of efficiency per cycle and less than 7% after seven cycles. The catalyst with the highest hydrogen production was 5%Ag@TiO2 NWs-20%MoS2, 1792 μmol/hg, at a wavelength of 400 nm. This amount was ca. 32 times greater than that obtained by the pristine titanium oxide nanowires catalyst. The enhancement was attributed to the high surface area of the catalysts, along with the synergism created by the silver nanoparticles and MoS2. All the catalysts were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller (BET) surface area analysis and energy dispersive X-ray spectroscopy (EDS).