Zr-rich Zr-Al-Ni-Ag metallic glass composites with high strength and plastic strain

• Published in: Journal of alloys and compounds 2022-10, Vol.918, p.165683, Article 165683
• Main Authors: Liu, C., Inoue, A., Kong, F.L., Zhu, S.L., Shalaan, E., Al-Ghmadi, A., Greer, A.L.
• Format: Article
• Language: English
• Subjects: Aluminum; Amorphous materials; Annealing; Composite materials; Crystallization; Dendritic [β-Zr + ω-Zr]; Glass; High strength; Icosahedral quasicrystal; Mechanical properties; Melt spinning; Metallic glass composite; Metallic glasses; Phases; Plastic deformation; Plasticity; Rods; Silver; Strain; Thermal stability
• ISSN: 0925-8388; 1873-4669
• DOI: 10.1016/j.jallcom.2022.165683

The glass-forming ability (GFA), thermal stability and mechanical properties of new Zr-rich Zr70–76Al7–7.5Ni15–20Ag2–2.5 alloys are assessed. Melt-spinning gives a glass (G) for 70–74 at%Zr and [G + β-Zr + ω-Zr] phases for 76 at%Zr. Crystallization occurs in stages: G → [G + icosahedral quasicrystal (IQ)] → [Zr2Ni + Zr2Ag + Zr5Al3] for 70Zr, G → [G + IQ + β-Zr + ω-Zr] → [α-Zr + Zr2Ni + Zr2Ag + Zr5Al3] for 72Zr, and G → [G + β-Zr + ω-Zr] → [β-Zr + ω-Zr + Zr2Ni + Zr2Ag] → [α-Zr + Zr2Ni + Zr2Ag + Zr5Al3] for 74–76Zr. Annealed ribbons with G, [G + IQ] or [G + β-Zr + ω-Zr] phases have good bending plasticity. The IQ and [β-Zr + ω-Zr] phases are spheroidal with diameters 15–28 and 20–35 nm, respectively. As-cast 1.5-mm-diameter rods contain a single glassy phase for 70–72Zr and [G + β-Zr + ω-Zr] phases for 74–76Zr. The rods exhibit high strength and plastic strain: 1499 MPa & 6.3% for 70Zr, 1475 MPa & 9.2% for 72Zr, 1458 MPa & 3.8% for 74Zr, and 1610 MPa & 2.7% for annealed 70Zr with [G + IQ] phases, respectively. These plastic strains exceeding 2% are unprecedented for [G + IQ] and [G + β-Zr + ω-Zr], indicating strengthening by precipitate dispersions. The formation of plastic [G + IQ] and [G + β-Zr + ω-Zr] bulk composites is expected to increase the engineering importance of Zr-based BMGs. •Quaternary Zr-Al-Ni-Ag metallic glasses with Zr content up to 74% were prepared.•Annealed alloys with IQ or β-Zr + ω-Zr precipitations show good bending plasticity.•As-cast and annealed glass/glass composites exhibit high strength and plastic strain.