Comparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer

• Published in: Coatings (Basel) 2022-10, Vol.12 (10), p.1473
• Main Authors: Lv, Xiao, Jin, Xuliang, Zhang, Zongxuan, Bai, Yuxing, Guo, Tingting, Zhang, Li, Zhang, Hui, Zhu, Jesse, Shao, Yuanyuan, Zhang, Haiping, Yuan, Bin, Yin, Aiming, Nie, Jinfeng, Cao, Fan, Xu, Zhengjun
• Format: Article
• Language: English
• Subjects: Additives; Blistering; Blisters; Carbon black; Cathodic coating (process); Cathodic protection; Chemical properties; Circuits; Coating processes; Comparative studies; Composition; Conductivity; Corrosion and anti-corrosives; Corrosion prevention; Corrosion products; Corrosion resistance; Corrosion tests; Dust; Electrical resistivity; Electrodes; Epoxy resins; Glass; Graphite; Marine environment; Morphology; Multi wall carbon nanotubes; Organic coatings; Paints; Polyanilines; Polymers; Prevention; Primers (Coating); Primers (coatings); Protective coatings; Spectrum analysis; Zinc; Zinc dust
• ISSN: 2079-6412; 2079-6412
• DOI: 10.3390/coatings12101473

Zinc-rich primers are among the most promising organic coating systems for improving the corrosion resistance of metals in the marine environment. However, the high zinc content results in poor coating adhesion, high cost, insecurity and pollution. To decrease the zinc dust content, the carbonaceous and polymer conductive additives carbon black (CB), conductive graphite (CG), multiwalled carbon nanotubes (MWCNT) and polyaniline (PANI) were introduced to partially replace the zinc dust in the primers. A comparative study of the anticorrosion performance of epoxy zinc-rich primer (ZRP) is presented herein to systematically discuss and elaborate on the effects of the different conductive additives. There were no blisters, rust or corrosion products presented on the coatings of the CB-modified series due to the good dispersion and conductivity of nanosized CB clusters, while the zinc corrosion products covered the surface of the MWCNT-modified series samples, which was attributed to the excessive electrical conductivity resulting in high consumption of zinc powder. The lamellar CG provided an additional blocking barrier for the coatings based on the maze effect. The transition from the intrinsic state to the doped state of PANI resulted in corrosion protection for the coatings depending on the cathodic and barrier function. The experimental results suggested that the formula with 2 wt.% CB and 67 wt.% zinc dust had the most promising anticorrosion properties, which was also demonstrated by the high Rct and low CPEdl values calculated according to the equivalent electrical circuit analyses.