Physical Modeling and Mathematical Modeling Using the Scale‐Adaptive Simulation Model of Nozzle Design Effects on the Flow Structure in a Slab Mold

• Published in: Steel research international 2022-11, Vol.93 (11), p.n/a
• Main Authors: González-Solórzano, María Guadalupe, Morales, Rodolfo Dávila
• Format: Article
• Language: English
• Subjects: Boundary layers; clogging criteria; Deflectors; Design; Flow distribution; Fluid dynamics; Inclusions; Internal flow; Liquid alloys; Menisci; Molds; Nozzle design; Nozzles; Physical simulation; Simulation models; sub-meniscus regions; Turbulence models; turbulence structures; Unsteady flow
• ISSN: 1611-3683; 1869-344X
• DOI: 10.1002/srin.202200395

The internal designs of two tundish nozzles A and B to deliver liquid steel in a slab mold are characterized by a full‐scale water model and the scale‐adaptive simulation (SAS) turbulence model. The internal flows in the nozzles determine the flow patterns in the slab mold and their clogging tendency. The SAS model predicts well the sub meniscus velocities measured through ultrasound signals and the unsteady flows of a given nozzle. The turbulence structures in the sub‐meniscus region yield slow descending rates of velocity–time autocorrelations leading to flow turnovers of low frequency using both nozzles. However, nozzle A (a bore with one expansion and one contraction) yields larger power density spectra than nozzle B (designed with internal flow deflectors) in the sub meniscus region, indicating that this latter nozzle dissipates more the turbulent energy, effect due to its internal flow deflectors. Four clogging criteria, wall‐shear, Q=12(ΩijΩij−SijSij), turbulence eddy frequency, ω = ε/k, and the instantaneous velocity in the boundary layer, together with the flow structure, prove to predict the propensity of a given nozzle design to clog by alumina inclusions in a particular region. This analysis reveals that nozzle B has a lower tendency to suffer clogging during industrial operation. The nozzle design is of vital importance in defining the internal flow in the nozzle and is decisive for the flow patterns in the slab mold and their clogging tendency.