Selective Vapor-Phase Hydrogenation of Furfural to Furfuryl Alcohol over Cu/Silica Catalysts

Vapor-phase hydrogenation of furfural (FAL) to furfuryl alcohol (FOL) was performed over 20 wt.% Cu supported on SiO2 under H2 pressure. The Cu/SiO2 catalyst with a pore size of 6 nm or larger provided FOL selectivity higher than 99% even at a high FAL conversion, whereas hydrogenolysis of FOL to 2-...

Full description

Saved in:
Bibliographic Details
Published in:Bulletin of the Chemical Society of Japan 2023-01, Vol.96 (1), p.8-15
Main Authors: Kurniawan, Enggah, Hayashi, Tetsugaku, Hosaka, Shuya, Yamada, Yasuhiro, Sato, Satoshi
Format: Article
Language:English
Subjects:
Catalysts
Contact pressure
Conversion
Furfural
Furfuryl alcohol
Hydrogenation
Hydrogenolysis
Pore size
Selectivity
Silicon dioxide
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Vapor-phase hydrogenation of furfural (FAL) to furfuryl alcohol (FOL) was performed over 20 wt.% Cu supported on SiO2 under H2 pressure. The Cu/SiO2 catalyst with a pore size of 6 nm or larger provided FOL selectivity higher than 99% even at a high FAL conversion, whereas hydrogenolysis of FOL to 2-methylfuran (MF) proceeded over the Cu/SiO2 catalyst with small mesopores of 3 nm even at low FAL conversion. The selective transformation of FAL to FOL was regulated by the reaction temperature, H2 pressure, and contact time: the high FOL selectivity was achieved by minimizing the stepwise hydrogenolysis of FOL to MF, which is favorable under severe conditions. Under the optimum conditions, the FOL productivity was 3.1 kgFOL kgcat−1 h−1 with a FOL selectivity above 99% at 150 °C and an H2 pressure of 2.0 MPa. Furthermore, the Cu/SiO2 catalyst could maintain the high activity on stream for 5 h, with no significant catalyst deactivation.
ISSN:0009-2673
1348-0634
DOI:10.1246/bcsj.20220285