Pore Characteristic Design Method of High-strength Pervious Concrete Based on the Mechanical Properties and Rainstorm Waterlogging Resistance

• Published in: Journal of Wuhan University of Technology. Materials science edition 2023-06, Vol.38 (3), p.567-574
• Main Authors: Zhu, Pinghua, Shi, Zhihao, Liu, Hui, Yan, Xiancui, Yang, Lei, Zong, Meirong
• Format: Article
• Language: English
• Subjects: Cementitious Materials; Channels; Chemistry and Materials Science; Compressive strength; Design techniques; Flexural strength; High strength; Materials Science; Mechanical properties; Porosity; Rain; Rainstorms
• ISSN: 1000-2413; 1993-0437
• DOI: 10.1007/s11595-023-2732-2

High-strength pervious concrete (HSPC) with porosity ranging from 0.08% to 2.011% was prepared. The mechanical properties and rainstorm waterlogging resistance of HSPC were evaluated, and a design method of HSPC pore characteristics (porosity and pore diameter) based on the mechanical properties and rainstorm waterlogging resistance was proposed. The results showed that the reduction of effective cross-sectional area caused by artificial channels was the main factor affecting flexural strength but had limited influence on compressive strength. Compared with the concrete matrix without artificial channels, the compressive strength of HSPC with porosity of 2.011% decreased by 7.4%, while the flexural strength decreased by 48.3%. The permeability coefficient of HSPC can reach 16.35 mm/s even at low porosity (2.011%). HSPC can meet the requirements of no rainstorm waterlogging, even if exposed to 100-year rainstorms. When the mechanical properties and rainstorm waterlogging resistance are compromised, the recommended porosity ranges from 1.1% to 3.5%, and the recommended pore diameter ranges from 0.8 to 2.7 mm.