An investigation of aerodynamic behaviours and aerodynamic performance of a model wing formed from different profiles

• Published in: Aeronautical journal 2023-04, Vol.127 (1310), p.676-697
• Main Authors: Aşkan, A., Tangöz, S., Konar, M.
• Format: Article
• Language: English
• Subjects: Aerodynamics; Aeronautics; Aircraft; Angle of attack; Astronautics; Bubbles; Flow separation; Fluid flow; Investigations; Laminar flow; Low speed wind tunnels; Reynolds number; Vortices; Wing profiles
• ISSN: 0001-9240; 2059-6464
• DOI: 10.1017/aer.2022.85

In this study, the aerodynamic performances and the flow separation behaviour of the wing profiles, used in the wing of Boeing 737-Classic aircraft, and a model wing formed of these profiles were investigated at 2 × 10 5 Reynolds number (Re) and different angles of attack ranging from −4° to the angle, which maximum lift point obtained. The experiments were conducted in a low-speed wind tunnel in Erciyes University Faculty of Aeronautics and Astronautics Aerodynamic Laboratory. Four profiles and the model wing, which was obtained from the combination of the four profiles were produced in a rectangular shape with dimensions of 0.21m × 0.21m. In the first part of this two-part study, the wing profiles were examined individually regarding aerodynamic performance and flow separation. In the second phase of the study, the aerodynamic performance and the flow separation behaviour of the model wing were examined and the results were compared with the data obtained from each profile. The study results showed that the slopes of the numerical graphics are generally quite consistent with experimental results. In addition, the pressure and velocity distributions have followed the normal trend until the angle-of-attack (AoA) of 20°. In contrast, the negative speed values and negative pressure zones have appeared on the profile above this angle. The air flowed as laminar on the profiles and the model wing until 20°, while laminar separation bubbles are begun to take place at about 24° AoA. Finally, the best aerodynamic performance has been obtained with the model wing.