Interface passivation with Ti3C2Tx-MXene doped PMMA film for highly efficient and stable inverted perovskite solar cells

• Published in: Journal of materials chemistry. C, Materials for optical and electronic devices Materials for optical and electronic devices, 2024-01, Vol.12 (2), p.562-574
• Main Authors: João Pedro F Assunção, Lemos, Hugo G, Jéssica H H Rossato, Nogueira, Gabriel L, Lima, João V M, Fernandes, Silvia L, Nishihora, Rafael K, Fernandes, Ricardo V, Lourenço, Sidney A, Bagnis, Diego, Santos, Sydney F, Graeff, Carlos F O
• Format: Article
• Language: English
• Subjects: Barriers; Electrical properties; Electrical resistivity; MXenes; Passivity; Perovskites; Photovoltaic cells; Polymethyl methacrylate; Radiative recombination; Solar cells; Wettability
• ISSN: 2050-7526; 2050-7534
• DOI: 10.1039/d3tc03810f

Achieving inverted perovskite solar cells (PSCs) that combine high efficiency and long-term stability is still challenging due to intrinsic material issues and low tolerance to environmental factors. The use of an ultra-thin poly(methyl methacrylate) (PMMA) layer to passivate interfacial defects as well as working as a physical barrier to extrinsic factors is promising. However, the low electrical conductivity of PMMA may have deleterious effects on charge extraction. Herein, we explored the use of Ti3C2Tx MXene as a PMMA additive (PMMA:MX) to tune the electrical features of the passivation layers. The optimal concentration of MXenes resulted in improvement of the PSC photovoltaic parameters, boosting their efficiency to 21.30 ± 0.51% (22.1% for the benchmark PSC). Electrical characterizations indicate a reduction of trap state densities accompanied by mitigation of non-radiative recombination. These features contributed to an increase in the extraction of photo-generated carriers and a considerable enhancement of Voc. The improved performance may be attributed to the electrical properties of MXenes and the better wettability of the PMMA:MX interface. Furthermore, the combination of hydrophobic characteristics and passivation features of the PMMA:MX layer resulted in more stable PSCs. The PMMA:MX based devices maintained 95% of their original PCE after 3000 h (ISOS-D-1I) and took 3× longer to reach T80 compared to the control PSC under heat and light soaking (ISOS-L-2).