A zero-thickness interface element incorporating hydro-chemo-mechanical coupling and rate-dependency

• Published in: Acta geotechnica 2024, Vol.19 (1), p.197-220
• Main Authors: Ghalamzan Esfahani, Farzaneh, Gajo, Alessandro
• Format: Article
• Language: English
• Subjects: Complex Fluids and Microfluidics; Constitutive relationships; Coupling; Engineering; Finite element method; Fluxes; Foundations; Geoengineering; Geotechnical Engineering & Applied Earth Sciences; Hydraulics; Interfaces; Landslides; Mechanical analysis; Mechanical properties; Mechanical stimuli; Research Paper; Salts; Shearing; Slope stability; Soft and Granular Matter; Soil Science & Conservation; Solid Mechanics; Stability analysis; Strain rate; Thickness
• ISSN: 1861-1125; 1861-1133
• DOI: 10.1007/s11440-023-01953-x

The interfaces play a key role in many engineering problems involving geologic materials. In particular, slope stability analyses of ancient landslides (that were subjected to large displacements along a slip surface) need the formulation of ad hoc interface elements. The mechanical response of slip surfaces in clays is affected by hydro-chemo-mechanical interactions and by rate effects and this paper presents the formulation of an innovative zero-thickness interface element for dealing with these kinds of effects. The proposed interface element is an extension of the modified zero-thickness element proposed by Goodman et al. (J Soil Mech Found Div ASCE 94:637–659, 1968). In addition to solid displacement, we consider the flow of water and the diffusion of a single salt in the fluid phase. Terzaghi’s effective stress principle is used leading to the usual hydro-mechanical coupling within the interface element. The fluxes of water and salt are considered in the longitudinal and in transversal directions of the interface element. For the constitutive relation, we propose an innovative nonlinear elastic energy that improves the numerical convergence in the occurrence of interface opening. The Mohr–Coulomb yield surface is used for the plastic regime in which we considered the effects of strain rate and salt concentration on the shearing behaviour of the interface element. The proposed element has been implemented in a user-defined subroutine of ABAQUS. The typical effects of salt concentration and displacement rate and the typical model responses for the longitudinal and transversal fluxes of salt and pore fluid are discussed in detail. Finally, the proposed interface element is validated through the comparison with experimental results.