The Masteralloy Concept for Sintered Steels - New Impetus for a Classical Approach

• Published in: Advanced engineering forum 2021-09, Vol.42, p.9-16
• Main Authors: Geroldinger, Stefan, Danninger, Herbert, Gierl-Mayer, Christian, Dunkley, John J., de Oro Calderon, Raquel
• Format: Article
• Language: English
• Subjects: Alloy powders; Alloying elements; Atomizing; Hand tools; Homogenization; Master alloys; Powder metallurgy; Sintering (powder metallurgy); Steel making; Tool wear
• ISSN: 2234-9898; 2234-991X; 2234-991X
• DOI: 10.4028/www.scientific.net/AEF.42.9

Among the various alloying techniques used in powder metallurgy, the masteralloy concept has been known for a long time. However, its use for production of ferrous precision parts has been hampered by several obstacles such as poor output of the useful fine fractions, high tool wear and slow homogenization kinetics of the alloy elements in the matrix. On the other hand, the masteralloy concept is particularly interesting for introducing cost-effective alloy elements such as Cr, Mn and Si since the masteralloy approach at least alleviates the problems caused by the high oxygen affinity of these elements. In the present study it is shown that recent developments have given a boost to this classical concept, one of these developments being powder manufacturing by high pressure water atomization which dramatically increases the yield of fine masteralloy fractions. The other progress is availability of thermodynamic software that enables defining masteralloy compositions with low melting range and thus fast homogenization also at moderate sintering temperatures. Combined, these new developments open the door for implementation of the masteralloy route in large scale PM parts production.