Fabrication of FeCu/CC Composite for Efficient Removal of Nitrate for Aqueous Solution Via Electrochemical Reduction Process

• Published in: ChemCatChem 2024-12, Vol.16 (23), p.n/a
• Main Authors: Li, Weiman, Yin, Qingbo, Liu, Cuicui, Yang, Shuqin, Jin, Dongyu, Wang, Xiuli, Song, Laizhou
• Format: Article
• Language: English
• Subjects: Aqueous solutions; Bimetals; Catalysts; Chemical reduction; Chlorine; Electrocatalysts; Electrochemical nitrate reduction; Eutrophication; Fatigue tests; Microparticles; Nitrate removal; Nitrates; Nitrogen; Oxidation; Quality standards; Reduction conversion; rGO/FeCu/CC electrocatalyst; Selective formation of nitrogen gas; Surface water; Wastewater treatment; Water quality
• ISSN: 1867-3880; 1867-3899
• DOI: 10.1002/cctc.202401017

The electrochemical nitrate reduction (ENR) for the conversion of nitrate to nitrogen gas is a significant strategy to remediate the eutrophication in surface water. However, the exploitations and practical applications of suitable electrocatalysts still face great challenges. In this study, FeCu bimetal microparticles were deposited onto surface of carbon cloth (CC) to fabricate the FeCu/CC electrocatalyst for the removal of nitrate. Among obtained catalysts, the sample with Fe/Cu molar ratio of 1 : 15 (Fe1Cu15/CC) exhibits the excellent electroreduction efficiency for nitrate removal (R(NO3−), >90 %) but an ineffective selectivity of N2 formation (S(N2), ~23 %). After the anchor of reduced graphite oxide (rGO) to surface of Fe1Cu15/CC, at the optimized condition without the assistance of chlorine oxidation, R(NO3−) and S(N2) of rGO/Fe1Cu15/CC catalyst reach 94.2 % and 72.8 %. After 5 day endurance test, the values of R(NO3−) and S(N2) are still 82.9 % and 62.8 %, demonstrating the promising durability of this catalyst electrode. Meanwhile, the potential application of rGO/Fe1Cu15/CC was explored for the treatment of simulated wastewater discharged by urban wastewater treatment plant, the concentration of total nitrogen (TN) decreases from 15–1.17 mg/L, and this value is lower than TN threshold limit in Class IV of Chinese surface water quality standard. The rGOFe1Cu15/CC electrocatalyst, obtained by anchoring reduced graphite oxide (rGO) on the surface of the FeCu/CC catalytic electrode, not only possesses outstanding NO3− removal capability, but also has excellent N2 selectivity in the absence of chlorine.